About calvin.chu

calvin.chu · 01-07-2020

Recently we upgrade an ASR1001-X from 16.3.4 to current suggest version 16.6.7. We found the input rate on traffic graph is doubled. Then I do a test on it with following setup: interface TenGigabitEthernet0/0/0no ip address!interface TenGigabitEther...

calvin.chu · 12-06-2016

Hi, We have a Cisco 3945e (15.4(3)M5) for VPDN connections and we want to get the login usernames by SNMP. Although MIB Locator said it support CISCO-VPDN-MGMT-MIB, we fail to query the username (1.3.6.1.4.1.9.10.24.1.3.2.1.2). > snmpwalk -v 2c...

calvin.chu · 04-28-2008

Hi, I want to ask if there is any way to change the label or stop adveritise label for an static route. Normally LDP advertises an Implicit Null label for directly connected routes. We want to do similar thing for static routes.We need to do this is ...

calvin.chu · 04-17-2008

Hi, Does any 7600 user able to get GLC-T or SFP-GE-T working with SPA-2X1GE under 12.2(33)SR IOS? I am having trouble to get it work after upgrade from 12.2(18)SX to 12.2(33)SR series. Both GE port and GLC-T/SFP-GE-T are working when I am using 1...

calvin.chu · 01-23-2008

Hi, we just replaced an existing 2611 with a new 2811 router. Everything working fine except we are seeing this log from time to time:Jan 23 20:49:26: %ARP-3-ARPINT: ARP table accessed at interrupt level 3, -Traceback= 0x4153A7D0 0x40FD9708 0x40FD6E...

calvin.chu · 01-07-2020

@juanmaoliva wrote:As per Cisco confirmation it affects also 16.06.06 and 16.06.08 versions.In our case only affecting received traffic on a subinterface.On ASR1001-X 16.06.07, it affect subinterface which match two level vlans, input counter is doub...

calvin.chu · 04-29-2008

Yes, I have both commands working for my case.

calvin.chu · 04-29-2008

Thanks. "no mpls ldp advertise-label" works for me.

calvin.chu · 04-23-2008

Thanks for the information. Actually we want to test out the new VPLS Autodiscovery, BGP-based feature which currently only available in 12.2(33)SRC and 12.2(33)SRB2. 12.2(33)SRC should support the hardware I am using if the page correct:http://www.c...

calvin.chu · 02-03-2008

Thanks a lot for the information. I tested and it is ok after we removed the service-policy which have police statement inside.

Member Since	‎09-08-2006 02:26 AM
Date Last Visited	‎01-12-2020 11:04 PM
Posts	18
Total Helpful Votes Received	5

User Statistics

User Activity

double input rate on sub-interface in ASR1001-X

Cisco 3945e and CISCO-VPDN-MGMT-MIB

Advertise implicit-null label for static routes

Cannot get GLC-T/SFP-GE-T to work with SPA-2X1GE in 12.2(33)SR

2811 ARP error message

Re: CSCvh59431 - Byte counters for physical interface and subinterface dont match

Re: Advertise implicit-null label for static routes

Re: Advertise implicit-null label for static routes

Re: Cannot get GLC-T/SFP-GE-T to work with SPA-2X1GE in 12.2(33)

Re: 2811 ARP error message