What are the corresponding suggested firmware versions?(note they are running on ACI mode) APIC-SERVER-M2, version 4.2(7I)N9K-C93108TC-EX, version 14.2(7I)N9K-C9336PQ, version 14.2(7I)
I append the new acl (number "9681") into existing ACL "ACL-AVCSS-in-3" (The ACL was applied in TenGigabitEthernet1/1/4 and TenGigabitEthernet1/1/4) on Apr 27 17:44:50. However, the track "%TRACK-6-STATE: 1 ip sla 1 state Up -> Down" and %TRACK-6-STA...
Last night, on our Nagios monitoring, we saw a lot of switches in this location were down. Upon checking on the switch’s log, I found there is flapping on the EIGRP and MAC-Address. Please find the attached document of logs for your reference.
kindly help me out on this issue..unable to perform SSH and the console is working-and very slow performance as well.C9500-16X 16.12.3a CAT9K_IOSXE INSTALL
Cisco : Switch PSU is BAD even after changing the PSU ------------------ show env all ------------------FAN 1 is OKFAN 2 is OKFAN PS-1 is OKFAN PS-2 is NOT INITIALIZEDTEMPERATURE is OKTemperature Value: 23 Degree CelsiusTemperature State: GREENYellow...
The link which you mentioned above is redirecting to some other website platform of cisco can you provide the exact link for that EIGRP Neighbor check t- shoot Spoiler
Slowness means not only during the console access entire performance is very slow, as you said that could be bug issue due to old ios version.for the SSH issue do you require any logs to analyze?
