About JBrav0

JBrav0 · 01-18-2024

Suddenly out of nowhere we stopped being able to make outbound calls and when we call in to our organization the call (from the cellphone not our IP phones) will ring for 2 seconds and then drop.I am able to ping to our Cube? I'm not familiar with Te...

JBrav0 · 10-02-2023

I have an SG300 on L3 mode. I had 2 issues at first. The first issue was that no SVI would ever talk to each other. This changed today when I set up DHCP on the switch and let it allocate IP's to devices. I know this leads to maybe a user error but t...

JBrav0 · 06-17-2022

There is a server on our environment that's running FileZilla and the way we have the rule set up using FMC is Set up: Objects: - Public IP, Private IP.- Ports that were asked to be opened. NAT Rule: For the public IP to the Private IP Initial Access...

JBrav0 · 05-24-2022

Hello all,I am currently running into the issue where the web portal for our CUCM Voicemail can't be reached. I can still ping it, access my voicemail boxes, and so on. I just can't get to the GUI. I tried following this article by cisco but the heal...

JBrav0 · 11-08-2021

First off im not an expert on VoIP.So recently in the last 2 weeks, our phone system has been unable to make external calls and external calls are unable to come in. There is no busy signal, it's just silence. Now, this isn't happening all day it s...

JBrav0 · 01-18-2024

Thank you for the help, as it turns out the device stopped being able to report to Cisco Smart license so the SIP feature just stopped working. I was able to get support to reset it for a temporary trial (30 days) So I had time to get it all straiten...

JBrav0 · 10-03-2023

Thank you, basically forgot to just create a Transit Network. I' used to cisco routers that I couldn't figure it out. After keeping everything the same except making the interface connected tot he router the gateway, along with telling pfsense that i...

JBrav0 · 10-02-2023

I did what you said and its still not working. I dont think its possible to do what I am asking to do with a pfsense router.

JBrav0 · 06-17-2022

That was it! Thank you.

JBrav0 · 11-09-2021

Yes, every time and they keep saying everything is okay. They say if there are slip code violations it's due to the clock not being set to the T1 line, but I verified this, and it's set to the T1 line. At this point, I believe it's the cable or somet...

Member Since	‎02-22-2021 03:36 PM
Date Last Visited	‎03-13-2024 12:46 AM
Posts	39
Total Helpful Votes Received	21

User Statistics

User Activity

Can no longer make outbound or inbound calls?

SG300 SVI's won't reach router interface.

Our ASA is blocking FileZilla.

Unable to access CUCM Voicemail Website.

Unable to make external Calls

Re: Can no longer make outbound or inbound calls?

Re: SG300 SVI's won't reach router interface.

Re: SG300 SVI's won't reach router interface.

Re: Unable to access CUCM Voicemail Website.

Re: Unable to make external Calls