Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,What are you thoughts on a suitable rooting protocol for a hub and spoke design network on a USA wide wan.There is currently two routers at the hub and 16 remote routers connected via static routes.Nathan.Oxford UK
Dear All,ist it possible to get hsrp working between a 2600 IOS 12.3 and a 1700 IOS 12.1?I am trying to build some redundnacy into a very badly designed network.Any suggestion received with thanks.Nathan.
Hi All,i am about to buy a 5505 with the following cards installed:System rack contains:-1 x Power Supply ModuleSlot 1.WS X5530-E3A Supervisor engineWS U53534 GESX 1000 Base SX Gbit EthernetSlot 2.WS-X5225R 24 port 10/100BaseTxSlot 3.WS-X5224 24 port...
Hi All,I have installed a 1130ag for the first time and I can not bring up the wireless/radio interface?I have it connected via http at the moment, and have tried to enable the radio through the GUI but it does not come up? (It normally comes up this...
Hi All,I have installed a 1130ag for the first time and I can not bring up the wireless/radio interface?I have it connected via http at the moment, and have tried to enable the radio through the GUI but it does not come up? (It normally comes up this...
Thanks guys.It was the ssid not being configured that caused the radio to not respond to the enable function.All is well now, I remembered this after 30mins of frantic IOS blasting and trying various other stuff..DOH!! Though all worked well and cust...
Hi,As previuosly mentioned, create a separate VLAN for the wireless netowrk traffic, you should implement security on your network addition WPA 2 encryption also with a registration sheet for a network policy confirmation term - a condition of use di...
Hi all,Firstly thank you all for your help.The issue is now resolved, though it is unclear what was the cause of the packet loss.Maybe a switching problem, its being monitored.I setup a packet sniffer on the access switch that the server was connecti...
