Two of our three wireless networks broadcast but not our Guest network. All networks are in flexconnect mode. Has anyone run into this issue?Thanks in advance!
I have 3 flexed WLANs at a branch that will receive DHCP from Windows at our DC. I'm unsure of what to set the relay to. Is it our L3 SVI which in turn relays to the DC or do we set the relay to the IP of the Windows server at the DC? Thanks in advan...
I've stood up a new WLC 9800CL at our data center with a bunch of APs sitting boxed at multiple branches. Is there a way to add these APs to the WLC via serial number? Just trying to grasp how to add these APs once they're powered on. Thanks in advan...
Good afternoon,A new client is splitting off from a parent company this Fall. They current have AP1852E-B-K9 and WLC5200 and they want to migrate to 9800-WL. I will have an instance of the 9800-WL stood up before cutover, but once the WAN is moved fr...
Our blade sees the LUN, but when attempting to boot ESXi (legacy bios) I get:Has anyone had experience booting to ESXi? I'm sure I'm missing something easy.Thanks in advance.
The only thing I changed was the unchecking of "Web Policy" then the SSID started broadcasting. I can leave as is with a PSK until we get our Clearpass instance running, but thought that was odd.
Yes, flexconnect. Sorry for the confusion. The WLC is at our DC along with our DHCP server. Right now I have the controller set as below. Our branch gateway is a SilverPeak appliance that is relaying to the DHCP at the DC. Thank you
