Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello colleagues
After a difficult deployment in South Korea, I want to share with you the complete Dial Plan and Dial Peer configuration for Cisco CUBE and SIP trunking.
As some of you might have experienced, trying to find the complete dial plan f...
Dear all: I've been working with CUCM for a while now, but I just downloaded the Cisco Phone Designer in my laptop to see how it works, and it turns out it won't start at all in my laptop. The message it show says "Phone Designer has encountered ...
Hello Brian I know this post is old but I just installed a couple of ASRs 1001-X with the Finistar FTRJ1519P1BCL and everything is working correctly. The compatibility matrix is always limited to Cisco parts. Hope this information is useful Allan Man...
Hello Paddingtonpd
One of the things I can observe in your description is that you are connecting a 10Gb SFP (SFP-10G-SR) to a 1Gb SFP (GLC_SX-MMD). These SFPs don't negotiate speeds and the 10Gb doesn't step down to 1Gb.
Hope this information is...
I just had the same issue in Cisco IM and Presence 9.1. After the server access got really slow and I tried almost everything but reinstalling, I noticed that my AXL user password had a @ and after I removed it, everything magically started to work a...
Well, first of all, thanks Mark and Toor. I've tried all of the posible combinations SIP Third Party Basic and Advanced without any luck, at most I got the rejected message with and without authentication. Tried to register it as an H.323 Client and ...
Hey Guys:Has anyone managed to register a EX90 in a CUCM 8.5 as a SIP Third Party device? I've tried all the solutions online and none works. Also tried to register it as an H.323 Client and Gateway and it doesn't work either. The only way I found t...
