About MeisnerC

MeisnerC · 06-03-2022

I went to set up a 8832 phone and discovered I can't seem to find any reference of the device within CUCM. We are running System version: 11.5.1.13902-2I'm not sure if this is a version issue or if I'm missing something.Not sure what other informatio...

MeisnerC · 12-15-2021

Currently we have 4 digit extensions setup in CUC for voicemail. Due to some mergers I've added some 5 digit extensions to CUC for voicemail. If I dial the user's 5 digit extension and they don't answer the call will forward to voicemail as expected....

MeisnerC · 11-18-2021

I'm implementing a Multi-tenant configuration on a SIP router that already has a SIP trunk configured on it. On the inbound dial-peer for the current SIP provider it is using "session target sip-server" command to identify the IP of the provider the ...

MeisnerC · 11-11-2021

I currently have a Cisco 4321 router that is setup with a single PRI and a single SIP trunk. We are adding a different SIP provider to this router. I believe I need to use the "voice class tenant" config for the second SIP provider. The current SIP c...

MeisnerC · 06-06-2022

Jamie, Thank you very much. I will install the DevPack for this device. I appreciate the help.

MeisnerC · 12-20-2021

Thank you @TomMar1. I apologize for the delayed response. I will give this and try and report back.

MeisnerC · 12-16-2021

@TomMar1 Thank you for your response. You are correct we currently have a *XXXX configured as a directory number associated to a CTI route point. There is a current VM profile which calls out XXXX in the "Voice mail box mask" field. I have replicate...

MeisnerC · 11-19-2021

Thank you all for your feedback. For my own understanding since the "session target sip-server" command is useless on this dial-peer. This dial-peer is grabbing any call that hits the router matching .T and is passing it on? I will remove the "sessio...

MeisnerC · 11-12-2021

@Roger Kallberg Thank you again. Your help is much appreciated.!

Member Since	‎07-29-2021 10:17 AM
Date Last Visited	‎09-09-2022 11:05 AM
Posts	18
Total Helpful Votes Received	10

User Statistics

User Activity

Setting up a Cisco Ip phone 8832 but I can't find it in CUCM

Currently have 4 digit ext want to add 5 digit extensions to CUC

dial-peer session target sip-server

Adding Multi-tenant Sip trunk config to existing SIP router

Re: Setting up a Cisco Ip phone 8832 but I can't find it in CUCM

Re: Currently have 4 digit ext want to add 5 digit extensions to CUC

Re: Currently have 4 digit ext want to add 5 digit extensions to CUC

Re: dial-peer session target sip-server

Re: Adding Multi-tenant Sip trunk config to existing SIP router