About JonathanC1

JonathanC1 · 02-06-2023

Hello Guys,I was just wondering what the proper way to reset the maglev CLI password was. I found this guide (https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/dna-center/218052-reset-cisco-dna-center-s-maglev-user-pas.html) but ca...

JonathanC1 · 06-06-2022

Hello Team, Whilst reading up on Service Insertion I am confused as what Service Insertion is in non-managed mode with no PBR. I can understand the strengths/benefits of PBR and managed mode service insertion (no PBR.) Can anyone help enlighten me - ...

JonathanC1 · 05-27-2022

Hello Folks, After reading the multi pod install guide from Cisco I was still puzzled at when to initialise the other APICs. We have two APICs in both data centres. We intend one to be standby in Pod 2. My main confusion on best practice is when I in...

JonathanC1 · 05-19-2022

Hi Folks, In the past, I've used WLC with DNA-C for SD-A implementations. And as far as I can see and know from the configuration we have to configure a WLC to a specific site only to deploy any configuration and this is a limitation. We have a singl...

JonathanC1 · 05-16-2022

Hi Guys, I am looking at purchasing DNA and giving a business case to do it. I have several switches already with DNA essentials/network essentials the switches and they are non-SDA. (1) Firstly to use application health I believe it is available wit...

JonathanC1 · 02-16-2023

I know this is an old thread but curious if you have to use BGWs in a back to back design. Could you theoritically use your spines as the BGW? Similar to ACI Mpod B2B (https://www.cisco.com/c/en/us/td/docs/dcn/aci/apic/kb/cisco-multipod-b2b.html) Ch...

JonathanC1 · 05-20-2022

Thanks guys - i thought this was the case but good to confirm with you all.

JonathanC1 · 05-16-2022

Hi Flavio, Very useful thanks. What doesn't make sense is https://www.secureitstore.com/datasheets/DNA-Switching-Matrix.pdf Full Flexible NetFlow is an essentials licensed feature and mentioned manual/automation! RegardsJC

JonathanC1 · 12-02-2021

You would need to test this for Wired. As you will be going through a DOT1X re-authentication again and yes if dynamic VLAN is configured shud be your be on the same network then DHCP server should offer you same IP as a binding will already be creat...

JonathanC1 · 11-29-2021

The link between CORE-001 and ACCESS is 172.40.255.112/31 - The CORE-001 IP is 172.40.255.112 and ACCESS is 172.40.255.113 The ACCESS has learnt this route from CORE-002 and not directly connected (172.40.255.119 is CORE-002):- BAR-CORE-001#sh ip rou...

Member Since	‎08-05-2021 01:37 AM
Date Last Visited	‎03-24-2023 12:03 AM
Posts	25
Total Helpful Votes Received	10

User Statistics

User Activity

Reset Maglev Linux Password

ACI Service Insertion Logic Check!

ACI MultiPod Install Order

WLC and DNA-C

Application health DNA

Re: Back to back BGW connectivity for DCI with VXLAN EVPN Multi-Site.

Re: WLC and DNA-C

Re: Application health DNA

Re: How does sd access give you same ip?

Re: IS-IS Strange Issue with a /32 route showing