About m.gnahoui

m.gnahoui · 06-13-2024

Hi, I wanted to make a backup of my CUCM 12.5 platform. I get the error "Failed to initiate backup. Backup failed, unable to create backup storage directory: /common/drf/2024-06-11-22-43-10/". I first expanded the disk space of the CUCM VM from 200G ...

m.gnahoui · 03-07-2024

Hi Cisco community, I have a problem with calls coming from outside via my E1 line.Outgoing calls from my network go through while incoming calls fail. TELCO (E1 with SDAs) --> CUBE (ISR 4331) --> CUCM (version 12.5) I tried to contact the TELCO but ...

m.gnahoui · 06-18-2024

I tried it but my disk usage is always at 100%. I deleted log files, unused firmware from phones too, but still nothing. Please help me ...

m.gnahoui · 06-14-2024

Thank you, I went through the article but actually the disk "Disk/logging 49573456K 0K 49290804K (100%)" is already 100% used. I can’t run the COP file to free up space. I get the error: "There is not enough disk space in the common partition to per...

m.gnahoui · 03-07-2024

Thank you so much. I was able to solve it by adding this : voice class codec 1codec preference 1 g711ulawcodec preference 2 g729r8! And I applied the "session transport tcp" and "voice-class codec 1" to all dial-peer voice XXX voip dial-peer voice 12...

m.gnahoui · 03-07-2024

CUCM is 10.205.0.21. What could be the cause and how to fix it ? Outgoing calls work well though.

m.gnahoui · 03-07-2024

Hi @b.winter , see below.

Member Since	‎10-19-2021 03:40 AM
Date Last Visited	‎06-24-2024 11:29 PM
Posts	7
Total Helpful Votes Received	1

User Statistics

User Activity

CUCM 12.5 Backup Failed / Not Enough space on Common Partition

incoming calls from TELCO fail via my E1 line

Re: CUCM 12.5 Backup Failed / Not Enough space on Common Partition

Re: CUCM 12.5 Backup Failed / Not Enough space on Common Partition

Re: incoming calls from TELCO fail via my E1 line

Re: incoming calls from TELCO fail via my E1 line

Re: incoming calls from TELCO fail via my E1 line