Hello, i'm testing DNA center API and I'm trying to do ip pools reservation through the APISo far i was able to catch in the browser console the API to get reserved vlan for a sitebut i can't figure out the right way to create reservationsThis is an ...
Hello Guys,
I've recently had to upgrade a UCS C220 M3 to 3.0.3.
During the upgrade it upgraded the embedded LSI Raid.
I'm able to build a raid with the new firmware and it is Online. Unfortunately the Virtual Drive is not recognised by VMWARE.
I'v...
Hello Guys, Does any one know if any endpoints supports the Wi-Fi Hotspot Profile feature?This feature is supposed to turn Cisco Phones into an access point !!! But I can't find any phones that support it yet.
Cheers
HI All, I've set up a Cisco Unity Connection 9.1 and configured the voice mail. When I call the voice mail from the phone, the menu plays super fast!!! That shouldn't play taht fast. How to tune it pls? Cheers Alex
Hi AllI've just reinstalled a CUCM 9.1 demo. The install went fine and I can access almost all pages.I can login into serviceability, but when I go to Tools>Service Activation page I get an Error 404 The requested resource (/ccmservice/ccmservice) is...
I found a Workaround for the bug CSCvc42926 J
- Migrate from DCNM 7.2(3) to 10.0(1) : ok
- Backup the DCNM en 10.0(1)
- Install a fresh install de DCNM 10.0(1)
- Import the backup in the fresh install. Test log...
Yes I see that it's not supported but apparently it used to be because it was working before the upgrade...Somehow someone may have come up with a driver...
Hello,I've found the issue laid in the conf of eth0If eth0 is set as dynamic ip ( via dhcp)You can't access serviceability.Set it to static, et voila :)