Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello I have a 3560 switch with ip routing enabled.On VLAN 1 network is 192.168.4.0/24 with ip at 192.168.4.1 and there's a WAN gateway at 192.168.4.2.I've set `ip route 0.0.0.0 0.0.0.0 192.168.4.2` and so I can use that gateway if hosts on 192.168.4...
Hi! I have a 3560 with VLAN 1 on network 192.168.4.0/25 with a WAN gateway at 192.168.4.1 and a second VLAN 10 on the 40.0.0.0/25 network. I want to access hosts on the 40.0.0.0/25 network from hosts on the 192.168.4.0/24 network but how can I do tha...
Hello I have a 819 ISR router with a k9 license. Can I create an IPsec VPN for 20 users? If I need sec/k9 what is the cost to upgrade approximately? Also suppose I buy a 1941 ISR from eBay with a hsec/k9 license. Can I transfer that to my 819?
Hello I have just ordered a very cheap but NIB C819 to play with. I want to connect the active GPS port to a third party antenna that requires 5v but cant find out what the output of the C819 active GPS SMA port is. The Cisco brand antenna has a spec...
Shoot maybe that's why. No I confused with private address space, not assigned. The WAN gateway is Nokia BGW320-505, NATs from a static ip to 192.168.4.0/24 with the 3560 assigning DHCP for both subnets. Any suggestions on improving the config welcom...
Can't ping across the subnets. Here is how I configure the VLANs with some security settings, is something I'm doing here wrong?conf t int vlan 1ip address 192.168.4.2 255.255.255.0no ip proxy-arpno ip unreachablesno ip redirectsno shutexitvlan 10nam...
Here's a fix from the first page of the readme of the image; enableconf terminalDevice(config)# ip http authentication localDevice(config)# username user privilege 15 password password Configure the username and password with privilege 15.do write me...
