Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We're finding ourselves in a difficult situation. With the Cisco / HP war on and the resulting discontinuation of the Cisco branded media servers, we're finding it tough to figure out the hardware equation. We are an HP shop in the Intel space and...
At one of our hospitals we have an old NEC 2400 IPX running release 25E. We're going to be replacing it with CUCM in a year or and currently have a local CUCM cluster & ISR gateways w/ QSIG integration to support some wireless phones. We're going to...
I am about to bring up our next hospital on a UC HA pair. There is a 7.x CUCM cluster in place that is just used for wireless phones today. We're going to be moving 50 or so of the existing Nortel desk phone users into a newly constructed area and ar...
We have just finished deploying our first few CUCM clusters with Unity Connection and IPCC enterprise w/ CVP. Eventually, Cisco IPT will be deployed to 30 hospitals and > 500 ancillary sites nation-wide with hospital-based CUCM and unity clusters an...
We're going to be deploying 20-30 VG224s at each of our hospitals to support patient room analog phones. We've got an IPTel services block consisting of 2 4948's L3 off of the core. L2 trunk and L3 eigrp adjacency (eigrp) between the 2 4948's. We ...
Abosolutely would be interested in any upcoming webinars. Thanks for the offer... We've put the work out to bid to ATT, Berbee, Coleman and Cisco AS.. Of all of those, none will touch it except Cisco but my previous AS engagements haven't been overl...
For anyone looking for the Nortel SIP and/or Unistim firmware... Both ARE available @ www.nortel.com and are available WITHOUT needing a registered account or even logging in as guest. In my case, the Unistim firmware hadn't been updated on the Nor...
Um, the VG224 most definitely DOES support EIGRP. That is the way that we have redundancy configured initially (2 routed links + loopback, EIGRP stub connected).The real question was should this be done via L3 as we're doing or does it make more sen...
Just did this. The ldap search filter can be modified either through the sql command or (preferred) via the SOAP interface into CUCM via the axl toolkit. I had an 'official' Cisco doc on this but not handy. A quick google search yields the following,...
You might try stripping down the 'enterprise' settings from the WLAN these reside on. Get rid of all of the fancy stuff.. DHCP REQUIRED, Aieronet extentions, Client exclusion, MFP and so on. Strip the WLAN down as far as possible & re-test. In par...
