Hi Guys,we encountered a funny issue when using ATA cards.We want to upgrade our Hybrid SUP2-2GE to Native IOS, but no ATA Cards(64MB or 128MB) are readable or formatable.Even a 24MB flash card was readable on one but not on another device.When tryin...
Good Morning,We use WS-C6513 Sup720 with IOS release 12.2(18)SXF5.Since we migrated no VLAN's (exept interface VLan's) are shown in running-config.They are present and can be configured (e.g. named), but they don't show up in a show running-config co...
Hi guys,We want to have a fallback user if our Tacacs is not reachable. Now we found out, that with more than 50 percent of our CATOS devices local users are not supported. Is there any other way of introducing a fallback? Especially with CatOS Versi...
well err.. yes. Thanks a lot.I corrected this and the connection works. The routing table on my client has the routes, but the router has no route back to my client.it looks like there is another issue...Maybe you like to take a deeper look?
Hi Ankur,yes i can confirm, that all vlans show up (even with their configured ASCII-Names) in a "sh vlan" command.I created them via config mode. After i found out, about the issue i tried to assign some vlans via vl database, but it seem that this ...
