Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi AllAny ideas why the 9120X is not connecto the AP before requesting an RMA? Perhaps its a simple fix I that I am not aware of. Following is the log after tried the >20 sec factory reset which didn't resolve the problem.so tried doing a >30Sec fu...
I have a WS-C3750x-24s running the image c3750e-universalk9-mz.152-3.E3. I am using APIC-EM PnP v1.3.3.126 to upgrade the IOS and push the config to it. But the image upgrade takes over 40 minutes to complete and resulting in error "Failed health...
I want to create several DHCP option instances.
if "zero is the only valid instance" why is it that CLI context help showing possible values between 0-255? Am I missing something here?
cisco ISR4451-X/K9 (2RU)
System image file is "bootflash:/isr440...
Hi
I came across a mis-configuration on a router that looks similar to below:
Router A has two different OSPF process declaring the same networks. OSPF appears to be working. What kind of network issues will occur with this sort of mis-configurat...
I tried testing a 2960x for this issue.Master Switch 1 is running 15.2(7)E6,Member Switch 2 is running 152-2.E7 (previous 2960x member failed and need to be replaced. Replacement came loaded with 152-2.E7. To test if it would auto-upgrade and use th...
You can boot from a USB size less than 2G with FAT16 format with the IOS but if you don't have one then you can use TFTP:***boot from compatible USB:**switch: boot usbflash0:c2960x-universalk9-mz.152-2.E7.bin **TFTP method** I recommend free TFTD64,...
