Hi , Just want to know in MPLS why I need to use MLDP to support multicast , however current LDP could achieve that along with multicast configuration ?
Thank you
Hi FolksI'm facing an issue while configuring IP SLA for DNS trigger between two routers connected to each other like R1 <<>> R2 .R1 - IP 10.1.2.1R2 - IP 10.1.2.2 Please find below helpful logs .. Looking for your thankful assistance ----------------...
Dears
I'm facing a problem during spanning-tree migration on our network from PVST to MSTP . I get such below error .
%SPANTREE-2-PVSTSIM_FAIL: Blocking root port Fa0/1: Inconsitent inferior PVST
BPDU received on VLAN 2, claiming root 12290:002...
Thank you Nagendra . So does this mean if I configure command mpls mldp will make one control plane for both unicast & multicast packets ? Another thing suppose we have 10 PEs have run multicast VPN , how many GRE tunnel would be neighbouring ?
Hi PeterI just thought that since 10.1.2.2 is R2 interface IP and as long as configured the same as DNS server through CLI . That might make R2 as server for lookup . Could you please elaborate me more how can make this works .