About kamlesh.sharma

kamlesh.sharma · 01-08-2007

Hi guys,We have two offices in same location withing 120 mt distance. both the location is having already established network router and switches. i need to connect both the offices. could you please suggest me solution for this. we need to extend th...

kamlesh.sharma · 07-27-2006

HI all,We have 4 switches connected like the diagram given below.What happens when link between mux to mux goes down mean any fiber cut in SP network our ethernet interface from switch 1 doesn't go down and for vlan 2 all data goes black holed.bcos s...

kamlesh.sharma · 07-26-2006

Hi All,I have lab configured like the diagram.my problem is when i configure a tunnel interface on ce1 with tunnel source interface s1/0 which is connected to PE1 and tunnel destination is the ip address of Ce2 which is connected to PE2. OSPF is used...

kamlesh.sharma · 12-25-2005

How EIGRP calculates load and reliability.how can i reset the values to make my high bandwidth path to be best route again.is this related to 5 min input and output calculation.In EIGRP RTS/SRTT values are propritory and on this load and reliability ...

kamlesh.sharma · 12-21-2005

Hi all,How De bit works in Frame-relay if i am connecting my Fr-switches over IP.R1----(s0)R2(e0)-------(e0)R3(s0)-----(S0)R4In this situation how i will use De bit for congession controlPlease HelpThanks in advance

kamlesh.sharma · 01-09-2007

thanks mahmoodthan we need to have Gbic port in both the end switch can be there a different solution like wireless which actually can connect the existing one without downtime.thanks

kamlesh.sharma · 01-09-2007

thanks for reply mohmood.building distance is 120 mt however Main street is there between the building. how to pull cable in this situation.thanks

kamlesh.sharma · 11-27-2006

Hi ScottMac Thanks for your reply and great to have your post to this topic. I configured rip ver 2 and no auto-summary. I ckecked it again in router's it still shows that summary route in rip database.Hope this could be an error or just RIP doesn't ...

kamlesh.sharma · 11-25-2006

I have checked that auto-summary entry's doesn't go even if you configure no auto-summary command.Please rate if it helps.thanks

kamlesh.sharma · 10-29-2006

Hi All,I think configuration of nat is OK but " ip nat inside source static 172.17.9.2 10.239.250.66 "Lets think about the L2-L3 mapping. router is translating the inside address 172.17.9.2 to outside address 10.239.250.66 but when the Machine on the...

Member Since	‎07-22-2005 12:05 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	159
Total Helpful Votes Received	43

User Statistics

User Activity

Office to office connectivity solution

Metro link and Spanning tree problem

MPLS and GRE tunnel

EIGRP load and reliability

How DE bit works in frame-relay

Re: Office to office connectivity solution

Re: Office to office connectivity solution

Re: RIP database showing auto-summary

Re: RIP database showing auto-summary

Re: NAT Problem