Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Friends,My user is not able to connect Cisco 5400 with windows vista while the same user is able to connect via windows XP.Dialer settings for both the windows are same .I am using windows dialer for both windows.I am using PAP authentication p...
HiWe have a network setup where the customers comes via internet to 7600 and from there we for ward this to mpls-vpn cloudCE -----Internet cloud -------Internet Access router --- 7600-----IP VPN cloudwe use ipsec tunnel from ce to 7600 .Sometimes cu...
Hi FriendsI got a Cisco Catalyst 6509 Switch with two SUP-2 Engines and Two MFSC cards.We are planning to do a ios upgrade .Can somebody suggest the way to it in this redundant environment.Thanks&RegardsTarun G
Hi FriendsI facing a problem in one of my Vlan 70 .Pcs in that Vlan are not able to not get ip from DHCP server.I have applied an access-list on that Vlan.After Removing the acces-list from that vlan Pcs in that Same vlan are able to Get ip from DHCP...
Hi FriendsI have got a setup where there are two core switches with vlans created on them.when i try to ping from a pc which is directly connected to core switch i got 10ms to 15ms response in between.This is happening in all vlansHere is the core co...
HiChange the boot variable so that the switch boot with new software image after reset. Old boot variable is cleared.Cat6509> (enable) clear boot system flash bootflash:New boot variable is configured.Cat6509> (enable) set boot system flash bootflash...
Hi Below link provide excellent information in terms of troubleshooting DHCP.Hope this will work for youwww.cisco.com/warp/public/473/100.pdf Thanks & RegardsTarun G
Hi, Please refer to the points below they may solve your problem1.If you have followed the configuration steps listed in the above sections, and are still notable to ping across the VLANs (between workstation1 and workstation2), then there is apossib...
Hi amenash,Below link gives you the detailed information abt logginghttp://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/config/logging.htmThanks & RegardsTarun G
