dear all,i'm using 3750ME with IOS 12.2(25)EY and 12.2(44)SE acting as PE device.on 3750ME ES port i'm configuring mpls connected to 7606 RSP 720 with IOS SRB1 as P device.the problem is, on 3750ME even i've changed the system mtu jumbo to 1546 or 90...
dear all,i configured two cnr for simple failover scenario.i only used CNR as DHCP server.i follow the user guide in http://www.cisco.com/en/US/docs/net_mgmt/network_registrar/6.2.1/user/guide/UG26_Fai.htmlhowever, if the backup cnr is in empty i can...
dear all,i've just installing CNR 6.2.3.1previously i was using CNR 5.5.9 and ubr7246. each ubr is handled by one CNR, and in ubr7246 there was only one management interface, so i can easily map client default to management scope.now there are more t...
dear all,i want to connecting two cisco switch 4948, 10G, using X2 module.can i do this by using X2-10GB-CX4 on both switch and using cable CAB-INF-28G-5= ?thanks,handoko
yes i can change the system mtu to 1546, but this affect the fastethernet interface mtu to 1546, while my customer requirement is only use 1500 byte on access port.
hi there,so which one is ISP A, ISP B and ISP C? and which one is ISP 1, ISP 2, and ISP 3?this is a link of PBR whitepaper,http://www.cisco.com/en/US/products/ps6599/products_white_paper09186a00800a4409.shtml