Hello,I was wondering how i can adjust the date/time on the meetingplace express v 2.0.1.15 server. I tried setting the hwclock and rebooted but still came up with the wrong time. The clock on the server is 15 minutes fast.Thanks,Scott
Hello,I have a 2811 router configured as an H323 with FXO ports going to the PSTN. I also have CallManager 6.1 and I am trying to figure out if there is a way to configure call waiting on the FXO port so that when a user is on the phone and a second...
Hello,I have a CUCM 6.1 server pointing to an H323 gateway. When I do a conference it seems like the 3rd party is connected but there is no voice either way. When i hit the confrn button again to bring the 3rd party in to the conversation i hear the...
Hello,I have CUCM 6.1 and have setup the meet-me conference numbers and also some outside DID's translated to the meet-me numbers. When I setup the conference from inside it works fine but when a user calls in from the outside they join the conferen...
I was wondering if there is any show or debug command for Cisco routers to see the traffic per ip address on a specific interface. In other words how much traffic is being used per user/ip address. I am having problem with the Rx interface on the r...
Hello,Yes, I do have the routing configured correctly from the GW to CUCM. The calls work fine for the first two parties but when I join the 3rd person it displays as though it is connected but just no voice between the 3rd party and the first 2. D...
Hello Chris,I am using a software bridge and i am fairly certain all parties are using G711. Do you know how exactly i can find out for our CUCM server?? Thanks for your help!Scott
Sorry, forgot to mention that I have configured everything in CUCM and Meetingplace and created the Video conference bridge and added it to the MRGL. It shows the bridge as registered in both CUCM & MPEThanks!