Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
On a customer site I have installed 5 CBW150AX in a VLAN (mgmt VLAN is primary on switch port).However, after some time, some access points are no longer seen by the primary AP.Network connectivity is there (verified). IP-Adresses are:primary: 192.16...
I installed a few CBW150AX into a customers network. MAnagement VLAN is distinct, the switch ports are set to Trunk with the management VLAN as the Primary VLAN ID.I created 2 WLANs, one with tagged VLAN ID 19 (which works correctly, the devices get ...
I resolved the issue over the night. It seems to me that the issue was related to a failed upgrade process from 10.4.2.0 to 10.6.2.0.I performed upgrades to 10.6.2.0 on the devices which could be reached. One of the member APs did not perform the upg...
For modern CBS switches there is a solution to get this working: you have to URL-encode the old password, then it is accepted.If your old password wasA+secretyou would have to inputA%2BsecretAnd no, this is not a joke, but a proven solution (had the ...
No, it is not. I experienced this with different kinds of Cisco 8 port gigabit switches in different installations, from small offices to large ones. Older Fast Ethernet switches did also not show this behaviour. I now ordered Catalyst 1200 and am cu...
Same issue as here:https://community.cisco.com/t5/switching/cbs250-8pp-d-is-crashing/td-p/4675099This is a design flaw which exists for min. 10 years now. It is related to shiedling. While the 19" switches are not impacted, the smaller ones are crap.
