Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi to all,cisco has not made it easy for us to snmp-poll over ipsec, running latest 9.16 on ASA5506x and I can poll public-ip over ipsec but thats where it stops.I need to be able to poll a non public IP where we only allow RFC1918 over the tunnel an...
Hi All,Im trying to get a very basic operation of ip sla with reachibility tracking to trigger route decision between two links.Link 1 - Primary ISP vlan201- is a dhcp link - I need to be able to track an address on internetLink 2 - Backup LTE link -...
Hi All. We have this strange wifi issue with 802.1x-flexconnect(switch vlan breakout) on vwlc(and wlc 5520) and 2802i everything looks fine, authentication works fine.APs er registered in controller and work fine but often client looses network acces...
Hi.
After changing management interface from internal to dedicated, cisco AnyConnect and S2S VPN traffic stopped working. Changing back resumes the operation.
The VPN which is used to access Management is UP and OK and Access to management over t...
Hi guys,
This should be a quite easy deployment to accomplish.
I struggle to make the Procurve the root for all vlans without the cisco blocking its uplink(trunk) to the procurve.
there is created mst region with same name and revision on both pro...
Hi again,After moving ip sla to global, importing routes to/from vrf/global this worked with both ip sla tracking and route failover from another vrf.I will probably use some kind of firewall with policy based routing/probe to achieve this as Cisco i...
Yes, and thanks,I'm aware of this but the problem with this dhcp link(which I do not have control over) is that sometimes interface stays UP(and thus the ip/gw) but upstream router actually is not forwarding traffic.in this case the route will still ...
the gateway/ip has change on me before and I really cannot rely on it staying same. It also happens that gateway is up but the something does not route correctlyI could try tracking with state instead of reachibility with both 1.1.1.1 and my def.gate...
