cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
743
Views
5
Helpful
2
Replies

802.1x flexconnect wlan issues

dmbnex
Level 1
Level 1

Hi All.

 

We have this strange wifi issue with 802.1x-flexconnect(switch vlan breakout) on vwlc(and wlc 5520) and 2802i

 

everything looks fine, authentication works fine.

APs er registered in controller and work fine

 

but often client looses network access, internet stops working, sometime it looses authentication alltogether and connection drops. then the client need to forget ssid and reauthenticate but sometime it just takes time and connection comes back..

this often happens when roaming and more often when roaming between floors(signal leaks through)

 

this is confirmed with both mac, windows and android client devices.

 

there is no particular timeframe when the issue occures and it happens at different times for different users/devices.

 

 

"LOCAL" tunnel works fine all the time.

vWLC/AP code 8.5.140

 

STAR LAN infrastructure:

DELL as "core"

cisco as access towards APs

dot1x auth is a AP->NPS->NPS/Active Directory

 

we have reset all APs to default and check all setup without finding anyting.

 

any help on how to troubleshoot this would be helpfull

2 Replies 2

patoberli
VIP Alumni
VIP Alumni

On the WLC enter:

debug client heretheclientsmacaddress

 

And then walk around with the client while the debug is running. If the problem appears again, please post the result of the debug here.

 

 - Or use the wireless debug analyzer which can be found on this page :

                https://developer.cisco.com/docs/wireless-troubleshooting-tools/

  M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card