Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So I have 2 vlans. One called infrastructure and another called general.
Infrastructure has firewalls and switches (6x sg500 52mp l2 mode) and servers.
general has the users and end user machines, and my pc.
I have set set up on my firewall in...
So i have a weird issue
I have set up my router and sg500 with Vlans, 10 + 20.
router is in L3 mode.
I have then cabled between the router (eth0) and sg500 (eth0), and ensured the port was trunked with both vlans assigned to the port as tagged.
I ...
need some help getting this going..
I have 2 SG500 switches in L3 mode, stacked, that will act as my main router.
I then have several SG500 switches in L2 mode dotted around the business.
I'm looking to cable 2 ports from each of the L3 switches ...
Hi All. Was wondering if anyone has managed to get the SIP endpoint from Dolby, VCP9000-0, working as a SIP endpoint on the Spark platform? I see a post that someone got it running on CUCM....
Hi all
possibly a simple question. I have 5 SG500 switches. 4 are currently configured as a Stack and in production. 1 is spare and that i use for test.
On the spare one, I have configured vlans, and interfaces and all the settings the way i would ...
has any one got any further thoughts on this? Im setting up another environment and facing the same issue. I am on the general vlan, and i can access everything on the infrastructure vlan, except for the web gui of the cisco switches.
switches are set up in l2 mode. Management interface has been set to the infrastructure vlan, with an ip on that range.
Firewalls have been set up to do the routing. This is confirmed working because i can access the firewall (infrastructure vlan) fr...
