Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello eveybody,we have a new site it is a small site we have only one access switch and 2 ISPS my manager wants our local traffic to go through our local router through the switch to the other ISPS also we have 3 VLANS we wanna route the traffic from...
Hello everybody,I have a lab that I got from my manager where he want the pcs (each one is on different VLAN) the I have set the router 2 which is my main router one port i receive all VLANs traffic and the other port to route traffic i can ping thes...
Hello everybody,we are facing a very strange issue with our IP Phones some of them not all of them GXP2140_ I will explain everything first we created a voice VLAN after testing everything is working fine we have everything locally in our site so aft...
hello eveybody we have 2 switches where they have same configuration with snmp and access list but still yet they are not working one does work fine and sends alert while the other doesn't send any alert i tried pinging zabbix there is ping without a...
Hello everybody I have a lab where some hosts are connected to the firewall that firewall is connected to a router i wanna ping the loobback interface on the router from hosts (ping from hosts to the loopback in the router) the idea of the lab is pin...
I think you misunderstood me the router we have is behind the switch our local router , and the other 2 isps are connected to the same access switch the issue that am having is I can't reach the 2 routers from my Pc clients and router I don't really ...
Many thanks for your responsecould you please explain more on that lets say if this scenario is in an enterprise will i need to configure the route to route traffic back so that they can reach the internet and get back a response am still learning as...
I have configured Router(config)#ip route 192.168.10.0 255.255.255.0 gigabitEthernet 0/0/0 but still ican't ping it says request time out really I don't understand the idea here why should do that when I have ping from R3 on R2? many thanks for your ...
he wants the traffic to go through the switch and the problem is I can't ping ISP1 and ISP2 from my pc which has the default gateway of VLAN 10 going to router (my main router locally) just to clarify
