Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, Faced an issue with the our Analog lines terminated on FXO ports. After long time working fine, the caller-ID stopped displaying for called incoming from the Analog lines on our Gateway conneted to Du telephone provider in Dubai Knowledge Vill...
Machine Authentication while using the Windows Supplicant is succeeding (live log attached). Machine Authentication while using the AnyConnect NAM (profile attached), is failing (live log attached).
NAM log shows something which is not clear:
24210...
For firepower configured with Passive Interface to do Discovery, show Connection, Intrusion, File, and Malware events, do we need to configure any policies (Discovery, Access Control, Intrusion, Malware&File) similar to those needed for Inline deploy...
I was considering the Rapid Threat Containment, by integrating ISE with Firepower. My understanding is that the quarantining action will apply on the current session. So if the user disconnect and connect again, its a new session that will be process...
Testing BYOD on Cisco ISe 1.3
Scenario:-
ISE 1.3, WLC 7.4ISE identity certificate is signed-by Microsoft AD, used for all portals.for Client Provisioning ISE will use internal CA.Wireless Clients IPad & Windows7Using Single SSID WPA2-EnterpriseClient...
The explanation here is more clear https://www.cisco.com/c/en/us/td/docs/security/asa/asa98/configuration/firewall/asa-98-firewall-config/nat-basics.html#ID-2090-0000046a.Round-Robin is one of the PAT pool options. The default behavior (wihout round-...
Great idea thanks.If I can find the session:ANCPolicy and session:EPSStatus, that will work.Also I got an idea to use an authorization profile with redirection to a hotspot guest portal that put the endpoints to an identity group. Will try to test bo...
The problem is due to the "idle timer" in the phone configuration page which you will probably find it to be set to 1 second. Most probably you didn't set this, but it came from the newly introduced "Universal Device Template", which get applied on a...
Hi,I just wanted to know if you were able to solve it. As I have a very similar situation on my 2 x 6506E Sup720-3C connected to each other, where I get a (not connected) on the interface status. I tried all that you did. The difference compared to y...