Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About yasaman64
Stats
Member since
06-20-2012
37
Posts
0
Helpful
0
Solutions
08-20-2012
11:58 AM
unfortunately i dont have access to the switches right now. i'll have to go on site..
... View more
08-20-2012
09:51 AM
I didn this and still not working, i thought maybe the problem was that the interface vlan was on a different switch, i could not even ping the dhcp server although i could ping the interface vlan 1 ip from the thin client.
... View more
08-20-2012
09:25 AM
Hi everyone, I would really appreciate if someone could help me with this. I have two switches and lagged them together and the port channel passes default vlan and vlan 90. i have interfave vlan 90 with 10.10.2.2 ip address on the top switch and on bottom switch i created the vlan 90 and assigned it to port 10 and attached a thin client to port 10. now here is my question. on bottom switch with thin client is connected to and doesnt have a interface vlan, i created ip helper for the interface vlan of the top switch pointing to dhcp server that is on defaul vlan. is this a right thing to do? can i create ip helper for another switch's interface vlan if they are connected properly. and my thin client cant get an IP, it can ping both vlans but cant ping dhcp server, what could be the issue? Thank you so much.
... View more
Labels:
08-14-2012
08:29 AM
oh really? well I have both, and i only have the aruba in my remote site. thank you so much for your help
... View more
08-14-2012
08:15 AM
I also have dell aruba 105 APs and Powerconnect w3400 for controller...
... View more
08-14-2012
07:22 AM
Hi everyone, Thank you for all your help on this, ifI want to go with DHCP option 43, and I have APs and the controller other than cisco, can i still go with this option? and how can i find the "option34 sub-option code" and the "vendor class indentifier" in that case? Thanks again
... View more
08-13-2012
11:59 AM
Hi everyone, I have a problem now, I brought up the AP and the factory default it and then gave it an ip address, DG and Ip address of the controller and there is a correct route between my sites but it still cant connect to the Controller, is there anything else i should do? thanks.
... View more
08-13-2012
07:10 AM
Thanks, so i can configure the APs with static IPs and then creat a route to WLC ip through DG?
... View more
08-13-2012
07:01 AM
Thanks Steve, What do i need for configuring IP helper. Is it enough to configure IP helper with the IP of WLC on both routers(the inside interface of remote site router where the APs are connected and the outside interface of the site 1 router)? and add ip forward-protocol udp 5246 and 5247 on both routers? Is that it? Thanks
... View more
08-13-2012
06:54 AM
Thank you, just one more question, how is the static Ip going to work, and what is DG? how is it configured? Thanks so much for your help
... View more
08-13-2012
06:35 AM
Thank you fbarboza Can it be done by puting IP helper with the IP of the WLC? How is that going to be done? i shoudl put IP helper on both router(the MPLS ones) on the inside interface on site 2 and outside interface of site 1?
... View more
08-13-2012
06:23 AM
Waseem, Can it be done by puting IP helper with the IP of the WLC? How is that going to be done? i shoudl put IP helper on both router(the MPLS ones) on the inside interface on site 2 and outside interface of site 1? and if i use ip helper or DHCP option 43 do i still need H-REAP? Thanks,
... View more
08-13-2012
05:33 AM
Thank you so much Waseem, I just didnt undrestand the third step, and the first link is not working...
... View more
08-20-2012
I didn this and still not working, i thought maybe the problem was that
the interface vlan was on a ...
08-20-2012
Hi everyone,I would really appreciate if someone could help me with
this. I have two switches and la...
08-14-2012
oh really? well I have both, and i only have the aruba in my remote
site.thank you so much for your ...
08-14-2012
Hi everyone,Thank you for all your help on this,ifI want to go with DHCP
option 43, and I have APs a...
08-13-2012
Hi everyone,I have a problem now, I brought up the AP and the factory
default it and then gave it an...
08-13-2012
Thanks, so i can configure the APs with static IPs and then creat a
route to WLC ip through DG?
08-13-2012
Thanks Steve, What do i need for configuring IP helper. Is it enough to
configure IP helper with the...
08-13-2012
Thank you, just one more question, how is the static Ip going to work,
and what is DG? how is it con...
08-13-2012
Thank you fbarboza Can it be done by puting IP helper with the IP of the
WLC? How is that going to b...
08-13-2012
Waseem, Can it be done by puting IP helper with the IP of the WLC? How
is that going to be done? i s...
Public Statistics
| Date Registered | 06-20-2012 06:32 AM |
| Date Last Visited | 08-18-2017 03:54 AM |
| Total Messages Posted | 37 |
Helpful Votes Given To
.jpg "VIP Mentor"){kind=icon}
