See: https://www.cisco.com/c/en/us/td/docs/security/ise/3-0/compatibility_doc/b_ise_sdt_30.htmlIt is disappointing to see that there are so many restrictions in the combination Meraki switches and ISE:12 dACL is not supported for Meraki switches.13 L...
Dear community members,What features does a N9K-C93180YC-FX support with NO (additional) license?Customer needs two Nexus switches to do vPC with multiple 25G LACP connections to local VMware servers and shared 4x 25G iSCSI storage. Nothing fancy and...
Since both C9300 and C9400 run IOS-XE and both are in essence access switches, can it be expected that the C9400 will support Embedded Wireless Controller (EWC) in the future? And if so, is anything planned yet? Regards,Martin
Hi all,The datasheet mentions that the Embedded Wireless Controller (EWC) on a Catalyst Access Points ONLY supports FlexConnect. This there really NO support for Fabric mode (SDA)? Is this feature to be expected in the future? I understand that the...
Why has the bug CSCvf47808 been replaced by CSCvg42682?
For CSCvf47808 there was already a fix in 8.3.130.0 and for CSCvg10793 there was a fix in 8.3.131.0. But now there is a 8.3.132.0 that fixes CSCvg42682. Why did something had to be fixed twice?
First I have to agree that a C9500-24Y4C in VSL is absolutely NOT uncommon. I have more than one customer with that setup. And also that updates to the documentation is a bit lacking for Prime Infrastructure.Now for the good news, it seems to be supp...
@yurii.chornyiDid you get it working? And if so how?The problem is that the use of ISE and MS Intune for posture assessment is validated with a Cisco classic network. The use of ISE for posture assessment with a Meraki network is also validated. But ...
Slide 1 is interesting. It is what I was discussion with a colleague that 3-party wireless on SDA should be possible. The OTT options both have the same problem as I described for SDA:If I use the central C9800-L as WLC for all the sites, it was to b...
I am gonna go for plan B:1. Before SDA use the EWC on the AP's2. After SDA use the eWLC on the C9400'sThe reason why is, that even if the latency is <20ms, then:If I use the central C9800-L as WLC for all the sites, it was to become ONE SDA-fabric ac...