Hi all. My customer is using PI 3.4 (upgrade to 3.7 is ongoing). Now, he is planning to change the management network of the hole subset of switches and routers. Is there a way to update the PI database to change the discovered management IP adresses without droping all the currently existing data ? Thanks in advance for your ideas ... Markus
... View more
Hi Eric.
Thank you very much for this hint.
I'll follow the link and will see, what happen.
My customer has also installed DCNM. But in fact, he has placed the Nexus 9236 as core switches, the management via PI3.4 will be necessary.
Regards
Markus
... View more
Hi all.
In PI 3.4 my devices N9K (N9K-C9236C / N9K-C93180YC-EX) are not supported.
Where can I see the road map for the device support of these types?
When will a new Device package be available?
Thx in advance for your answers.
Regards
Markus
... View more
Well, guys .... I've solved the problem by deleting the devices and a new add (manually) of them.
I don't know why .... but it works ...
Never the less, the main problem is not solved completely.
Viewing to the performance data dashboard (e.g. Top-N Server), the end-hosts are displayed by IP-Address.
I've enabled:
Administration > Settings > System Settings > Client and User > Client > Lookup client host names from DNS server
Should I do additional things to display the names?
Regards
Markus
... View more
The DNS-Servers are working as DNS and also as Reverse-DNS.
I've tested this from the PI-Server and from several devices as well. It works.
Some other ideas?
Regards
Markus
... View more
Hi all.
I've a little problem with my PI 3.3
Some devices are properly displayed with the dns-name. Some not ...
The DNS-entries are correct. The ip domain-name is also defined.
Here is the Show running from the CLI
hostname PRIME01
!
ip domain-name XXXXXXX.YZ
!
interface GigabitEthernet 0
ip address 10.0.0.12 255.255.255.0
ipv6 address autoconfig
!
ip name-server 10.0.0.30 10.0.0.116 10.16.0.4
!
ip default-gateway 10.0.0.1
!
clock timezone CET
!
ntp server 10.250.0.45
!
username admin password hash. role admin
!
service sshd
!
repository NTM
url ftp://10.0.0.49/
user admin password hash
repository defaultRepo
url disk:/defaultRepo
!
password-policy
lower-case-required
upper-case-required
digit-required
no-username
disable-cisco-passwords
min-password-length 6
!
logging localhost
logging loglevel 6
!
cdp timer 60
cdp holdtime 180
cdp run GigabitEthernet 0
!
icmp echo on
!
The DNS-Servers are accessible (ping, traceroute)
All ideas what the problem could be, are welcome :)
Regards
Markus
... View more
Hi all.
Who is currently the account manager of Cisco in the part of education in Germany?
Please let me know hers/his email address.
Thx in advance
Markus
... View more
Hi all. I'm missing a function in PI 2.0 (as I know from LMS 4.2). Reporting a MAC-Address-List by device (switch). In PI, I've only found a report "device" ==> "wired port attribute" ==> "wired port attribute detailed report" Here I can select "Report by Device Name" some attributes and "sort by name" But the result has no information about the device name ... In the field "Device IP Address" is only the IP-Address of the accessed end-device filled in (e.g. a PC). In the field "Name" is filled in the name of the interface (e.g. Ethernet ) My question is now: how to create a custom report with the information "Switch" ==> "Port" ==> "connected MAC-Address" ==> if possible "connected IP-Address" Regards Markus PS: Here the structure of the report I've found: Name VLAN Id Device Ip Address Description MAC Address Admin Status Operational Status Type MTU Speed(MB) Duplex isTrunk TrunkEncapsulation FastEthernet1/8 0 1XX.YY.ZZ.7 switchxyz-as-00 / NEXANS 00:19:e7:e5:09:17 Down Down ETHERNETCSMACD 1500 100 FULLDUPLEX true _8021Q
... View more
Hello everybody. Just a little question: We are using Cisco Prime 2.0 If I install a LMS 4.2, am I able to use the lms-licenses of the existing Prime 2.0 to activate the LMS? The reason is, that I'm missing a lot of features of LMS in Prime 2.0 Thx for your answers Regards Markus
... View more
Hi all. Is there a possibility to connect directly to a specific vty via Telnet or ssh? The fact is: I have a misconfigured switch with no athentication on line vty 0 4, but with the correct configuration on vty 5-15. So I would like to know if there is a possibility to specify the linie vty I'll connect. Thanks for your help. Best regards Markus
... View more
Hi. We are using Cisco Prime Infrastructure Manager 2.0 My question is: Is there a possibility to find out the serial number of a connected AP? Regards Markus
... View more
Hi. One of my customers has a managed LAN and WAN. Today, he is using LMS 4.0.1 and WCS for Network Control. The configuration of the devices is in such a way that all the snmp-traps are sended to the LMS and the umbrella system by the provider (Switches only), the WCS are sending all the traps directly to the provider system. The WCS (5 devices) are sending about 5000 traps a day averagly. That's too much (only a few of these traps are relevant). Is there a possibility - by upgrading to NCS - to filter these messages (e.g. by serverity level) bevor sending to the NMS? Or is there a possibility with the combination of LMS 4.2 and NCS to do this? Where can I find some informations about the snmp trap handling of the NCS; the possibilities of filtering and/or the combination of LMS 4.2 and NCS? Thanks for your efforts Markus
... View more
Hi. Thanks for the fast response. I'll try this way. Fyi: I was successful now with some devices ... but I've had to try it up to 15 times .... Tomorrow, I'll continue .... Regards Markus
... View more
Hi. I'm using LMS 4.0.1 (current patches and device packages) There is a problem with the configuration fetch. There are some 2503 routers with IOS 11.3(6) and the message on LMS is: Couldnot enter ENABLE Mode from USER Mode on Device The devices arn't configured with username, only telnet pw and enable pw; no access-lists or other limitations configured The credential check is ok ... multiple checks done ... devices deleted, new discovery ... devices deleted and manually added .... with the link //serverip:1741/rme/rmedevices.do I've changed the timeouts multiple times (up to 60 seconds for TFTP, SNMP) .... all these have had no effect of the config fetch Somebody here with other ideas?? Regards Markus
... View more
Hi. I've a problem with Cisco View on LMS 4.0.1 (latest patches and device packages; Win 2008 R2 Server Enterprise 64 bit; 12 GB RAM). By right mouse-click on the chassis of a 4506 appears the menu. A click on the part "PoE" will be returned by an error. See pictures: error1.jpg and error2.jpg Any idea? Regards Markus
... View more