Ok guys... i figured it out :)   The solution was to create an inbound dial peer with only answer-address for ANI to match, In this dial peer i used a translation profile incoming TEST, which add a prefix to called number   then i created a dial peer outgoing to sip  trunk with destination patter 99T and in this dial peer i used another translation profile which remove the prefix from number , et voilà :) This is an example of what i did   dial-peer voice  100 voip description N_BREVI_CALL_LEG_INCOMING translation-profile incoming ADD_SD_ALESITAJ answer-address 0131T voice-class codec 1   dial-peer voice  1100 voip description N_BREVI_CALL_LEG_OUTGOING translation-profile outgoing RMV_SD_ALESITAJ destination-pattern  100T session protocol sipv2 session target ipv4:X.XX.X.XX session transport udp voice-class codec 1   voice translation-profile ADD_SD_ALESITAJ translate called  100   voice translation-profile RMV_SD_ALESITAJ translate called  200   voice translation-rule  100 rule 1 /^3/ /1003/ rule 2 /^0/ /1000/   voice translation-rule  200 rule 1 /^1003/ /3/ rule 2 /^1000/ /0/     and so on   I hope this help :)     ... View more

Hi Gergely,unfortunatly i don't know other credential that utilize for the login, because i don't have installed this UCCX. The only one user that i retrieved from customer is the standard: Administrator ciscocisco. ... View more

Hi, it's strange yes ,  i tried to reboot server, restart services, logout and login. I tried 3 different browsers (ie,firefox,chrome) but it's not a java or css problem, the HTML code below show null As you can see id menu_1 and menu_5 is empty , while menu_6 (help menu) is filled with options..                     Contents and Index             For this page             http://www.cisco.com/en/US/products/sw/custcosw/ps1846/tsd_products_support_series_home.html " target="_blank">Cisco Unified CCX Documentation on Cisco.com   I had an idea, to use directly the address bar without click any button, so i put in address bar this: http://x.y.z.w/appadmin/CCMConfig?request_type=configure and it show me Unauthorized Access ......... Fortunately , what i need to know is the jtapi trigger route point number, so i put on address bar http://x.y.z.w/appadmin/JTAPITrigger and i see configuration...but menu still hidden .... WTF?? I'm wondering why i can't see all menus.. ... View more

The system version of WLC is this: 7.2.110.0 I use ISE portal.. and you can tell me where i collect Logs? If you fix the main post, i reply there! Thx you. ... View more

Thx you Scott, i understand what are you talking about, but my problem is different. I try to explain.. I see the wireless network, i associate the iphone to this network, so i'm  redirected to Login page, as i use the "Apple Login" or i Open a Web Page . In this page , that i reach with all devices i put my credentials, then i will be redirected with all devices back to Access Point ( https://1.1.1.1/login.html ). In this page i should be   redirected to internet after Radius Authentication, but with Apple Devices this doesn't work. This is thw WEB AUTHENTICATION from Cisco Documents. The user associates to the web authentication SSID. The user opens their browser. The WLC redirects to the guest portal (such as ISE or NGS) as soon as a URL is entered. The user authenticates on the portal. The guest portal redirects back to the WLC with the credentials entered. The WLC authenticates the guest user via RADIUS. The WLC redirects back to the original URL. ... View more