I have a few remote VPN Users with home phones but in different time-zones than the CME Router. Is there a way to set the time-zone on a per phone basis so these phones show the right time? I am running CME 8.5 on a 2801 router and these are 7965 p...
I have a working 7965 VPN phone via an ASA5505 and 2811 CME router. I would like to do 2 things.1) Have the VPN Phone authentication via certificates. I don't want to enter a username and password everytime the phone powers up, I just want it to con...
I have 2 internet t1 lines with different public ips on each. Is there a way to have a dual-homed solution without a BGP configuration. I am familar with that process, get an ASN, register with arin.... Not a good option for a small company that ...
It is part of the CUCME Admin guide, http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevpn.htmlMy testing was with a 2811 ISR router, CME 8.5 is not available on the UC500 yet. I will also mention I did get the ...
I followed the App Note on using a 79XX phone with a SG-300 and it didn't make one thing clear to me. I had to manually add the 'Admin VLAN id' for the voice vlan to my phone in order for the phone to be in the voice vlan and pc connected to be in t...
Thanks for the response, I look forward to CME 8.6 and guide. On the certificate info, thanks again, if I figure out how to do it I will only charge a small fee to cisco for the sample guide. Of course, if it becomes available, I would love to see...
