Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Does anyone have any ideas on the following?There are two CUBEs with a SIP trunk on each, the second is an SRST gateway with ISDN.The CUBEs are configured in CUCM as SIP trunks.Is there a way to try each CUBE (SIP trunk) first the the second C...
Hi.I'm having problems with the calendar/meeting status integration with Presence 8.5 and exchange 2010.I've been through all the documents regading setting up Exchange 2010 "suImpersonation" etc but I'm getting 401 errors.Errors:01292: 10:34:57.041 ...
Hi,I've got a Call Manager 5.1 Cluster and I'm getting the Error message :INIT: Id "SD0" Respawning too Fast: Disabled for 5 MinutesThe message is appearing on the subscriber only and there is only on Subscriber. I've tried upgraging to 5.1.3c but I'...
Hi I have the following setup:(Checkpoint) --- (Cisco 827) --- (Internet)(192.168.2.1)--- (2.2)-(10.1.1.1)-(10.1.1.2)There is only one public internet address on the 827.my questions are:1. Is there any way to make the 827 completely transparent so a...
Hi i'm trying to get Caller ID working on an FXO port on a MC3810. I've found on Cisco that the Version of the FXO-UK card must be 03.XX or later. I have 03.A0 an still can't configure it. Am i missing anything?Here is the Sh ver from the 3810.Router...
Hi I only have 1 softphone which was for testing. I'm thinking of deplying more softphones so I'll test it in the lab and can let you know what I find. We're running 3.3.2. but we are going to 3.3.4.Thanks
Hi,I've been monitoring the problem and the CTI connections. at about the time when the Call Manager would max out I see an increase in the CTI connections. The CPU still goes above 80% but not as bad as when I had some detailed logging turned on. I'...
