After converting exchange 2007 from raw luns/iscsi to vmdk's our unity 7.0(2) TUI has a 25-30 second pause when trying to retrieve messages after entering the users password. It is quick to answer and take messages though.Latest patches deployed, per...
In Cisco Unified Communications Manager CDR Analysis and Reporting tool is there a way to create a manager login with rights to run reports on specific extensions (~users). For example I would like John Doe who runs our AP department to be able to ru...
SIP conference phone maximum lines stuck at two. Soundpoint IP 7000 with CUCM (Cisco unified call manager) 7.1 I did some searching but no luck. Sorry in advance if the solution should be overly obvious.The problem is that I can't add more then two p...
Hopefully these are helpful:CISCO CVP VOICEXML 3.0 Programmer Guidehttps://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/customer_voice_portal/cvp3_0/program…CISCO CVP VOICEXML 3.0 Element Specificationshttps://www.cisco...
I had a similar problem. After confirming it was not a problem with an on-site email security solution (not seen on inbound packet capture) I worked with WebEx support and came across a different scenario. For me the problem had to do with an old Web...
We had the same problem and Steve shared his experience 3.3.3SE and this helped us.Most likely unrelated but we also ran into another problem when using both SNMP v2 and v3 for discovery. Bug ID CSCuv51450.
It turns out for me they can just be in "Standard CCM End Users", My problem was assigning the users at the device level instead of the line level.P.S. for some reason I only see the "Associate End Users" option on the line level when I navigate to i...
