Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About saljam100
Stats
Member since
02-22-2011
26
Posts
5
Helpful
0
Solutions
Created by
saljam100
in Network Management
in Network Management
11-04-2012
03:01 AM
11-04-2012
03:01 AM
Dear All I need to back up my flash files to my ftp server i found some solution about running configuration to save on tftp or ftp but not the flash files any help will be appreciated. i saw some examples using cisco archive command or EEM scripts to make automatic back up of running config but i want to back my flash file's automatically due to some reason. Hope you guys will help me. Regards Salman
... View more
Labels:
10-23-2012
12:30 AM
Dear Alexander thanks for reply but i cant access the call manager express the way you told me also i need to ask you one question is that by doing the above process will the end user get the GUI interface of whole call manager express or just his profile ? like its hapens in Call manager when user access url like https:// ip address of call manager/ enduser.html so its got only the access to his profile and then the user can make changes ....... so will your mentioned process work like the same way as this url https:// ip address of call manager/ enduser.html work in call manager ? please elaborate. Thanks again. Regards Salman Jamshed
... View more
10-21-2012
10:29 PM
Hi all I configured extension mobility on cisco call manager express but i dont know how to configure it so my user's can set their passwords individualy like it hapens in call manager environments where at the time of log out user have an option of " set pin " so the user can set the password privately, but i dont know how to enable this feature on call manager express ............... so please let me know how this feature could be used in call manager express. Hope you guys will help and sooner to reply me. Regards Salman
... View more
Labels:
Created by
saljam100
in IP Telephony and Phones
in IP Telephony and Phones
10-16-2012
11:49 AM
10-16-2012
11:49 AM
Hi all I want to redirect incoming call to any co-worker if he/she is not on seat to my extension by simply dialing his/her extension, i dont want to use typical pickup or pickup group feature because i dont to press pickup button and then press answer to take the line........is here anyone knows the solution for this...i hope you guys will help me....... if there any confusion do let me know. Regards Salman
... View more
- Tags:
- callmanager_6.x
Labels:
Created by
saljam100
in IP Telephony and Phones
in IP Telephony and Phones
10-09-2012
10:17 AM
10-09-2012
10:17 AM
Thannks alot for help but the problem is solved .....actual problem was that all of the ports were assigned to the IVR application i make it to zero and its worked.. Thanks again specially Mr. Chris Regards Salman
... View more
Created by
saljam100
in IP Telephony and Phones
in IP Telephony and Phones
10-08-2012
10:33 PM
10-08-2012
10:33 PM
Thanks for reply Chris the part of show output " Index 1 Feature: VMIVR-PORT Period left: 7 weeks 4 days License Type: Evaluation License State: Active, In Use License Count: 60 /6 License Priority: Low Index 1 Feature: VMIVR-PORT Period left: 7 weeks 4 days License Type: Evaluation License State: Active, In Use License Count: 60 /6 License Priority: Low " says about port but nowhere its shows the number of allowed ports, also can you please tell me that can we use AA feature with evaluation license ? The above debug error, is this error also appears when we already occupy all of the available ports? Thanks for yours cooperation hope you guys will help me. Regards Salman
... View more
Created by
saljam100
in IP Telephony and Phones
in IP Telephony and Phones
10-08-2012
02:19 PM
10-08-2012
02:19 PM
Dear Chris and roger and all other expert I enabled the SIP trace on my unity express module its give me following output also do let me know if you need complete file i will send you complete file and also for your's reference "8150" is AA extension and 1106 is the extension which i used to dial my AA extension. " 4079 10/08 14:32:09.850 ACCN CHMG 0 EXCEPTION: at com.cisco.contact.impl.Contac tStubImpl.addChannels(ContactStubImpl.java:1667) 4079 10/08 14:32:09.851 ACCN CHMG 0 EXCEPTION: at com.cisco.channel.impl.Channe lManagerImpl.getFromDifferentClassGroups(ChannelManagerImpl.java:950) 4079 10/08 14:32:09.851 ACCN CHMG 0 EXCEPTION: at com.cisco.channel.impl.Channe lManagerImpl.getIdleChannels(ChannelManagerImpl.java:686) 4079 10/08 14:32:09.851 ACCN CHMG 0 EXCEPTION: at com.cisco.channel.Group.getId leChannels(Group.java:305) 4079 10/08 14:32:09.852 ACCN CHMG 0 EXCEPTION: at com.cisco.wf.subsystems.jtapi .TAPIPortGroup$RouteCallObserver$1.run(TAPIPortGroup.java:17573) 4079 10/08 14:32:09.852 ACCN CHMG 0 EXCEPTION: at com.cisco.executor.impl.Paral lelExecutorImpl$WorkOrder.run(ParallelExecutorImpl.java:283) 4079 10/08 14:32:09.852 ACCN CHMG 0 EXCEPTION: at com.cisco.executor.impl.Worke rPool$Worker.run(WorkerPool.java:398) 4079 10/08 14:32:09.853 ACCN CHMG 0 EXCEPTION: at java.lang.Thread.run(Thread.j ava:595) 4079 10/08 14:32:09.853 ACCN CHMG 0 ChStubImpl:releaseChannelLock() - channel lo ck releasedChannelStub[channelClass=com.cisco.dialog.DialogChannel,type=Cisco Me dia Channel,id=3,state=IDLE,pendingState=null,groupId=0,locked=false] 4079 10/08 14:32:09.853 ACCN CHMG 0 ChStubImpl:releaseChannelLock() - channel lo ck releasedChannelStub[channelClass=com.cisco.call.CallControlChannel,type=Cisco CTI Port,id=2,state=IDLE,pendingState=null,groupId=1,locked=false] 4079 10/08 14:32:09.854 ACCN TELS 0 CTIPG_ROUTE_EVENT:CTI Port Group route event : Route Session=[8150:P_Local:1/(P1-jcue) GCID=(1,11766)->ACTIVE]->OFFERED,Route Address=8150,Failure reason=Terminate Route Connection,Exception=com.cisco.chan nel.ChannelLicenseViolationException: license limit exceeded for application typ e: AAWorkflowPrivilege 4079 10/08 14:32:09.855 ACCN TELS 0 EXCEPTION:com.cisco.channel.ChannelLicenseVi olationException: license limit exceeded for application type: AAWorkflowPrivile ge" i have two questions 1) in the above output does bold lines means is there something wrong with the license is that clear from output that call is hitting unity express (8150) from (1106)? 2) can i use AA feature in evaluation license what following show license output means ? " se-1-1-1-10# sh license Index 0 Feature: VMIVR-VM-MBX Period left: 7 weeks 4 days License Type: Evaluation License State: Active, In Use License Count: 600 /65 License Priority: Low Index 1 Feature: VMIVR-PORT Period left: 7 weeks 4 days License Type: Evaluation License State: Active, In Use License Count: 60 /6 License Priority: Low Index 2 Feature: VMIVR-IVR-SESS Period left: 7 weeks 4 days License Type: Evaluation License State: Active, In Use License Count: 60 /6 License Priority: Low se-1-1-1-10# sh license feature Feature name Enforcement Evaluation Clear Allowed Enabled VMIVR-VM-MBX yes yes yes yes VMIVR-PORT yes yes yes yes VMIVR-IVR-SESS yes yes yes yes I hope you guys will help me and sooner to reply as its very urgent. Regards Salman
... View more
Created by
saljam100
in IP Telephony and Phones
in IP Telephony and Phones
10-06-2012
04:16 AM
10-06-2012
04:16 AM
Thanks Roger Welll my CTI ports are register with CUE, also when initialize the unity express module its bring all the CTI ports.....i have one question my call manager and gateway on which the module is plugged our on LAN they are connected directly like my call manager IP is 192.168.2.X and my CUE IP is 1.1.1.10 like 192.168.2.X--------------->Switch------------------>GW with Module (192.168.2.X GW IP and 1.1.1.10 is module) Clear me onething when i put commands like " Debug voip dialpeer " will the gateway shows me output when i call the AA extension . also i will try to get configuration if my boss allow me okey Hoping to get yours reply soon. Regards Salman
... View more
Created by
saljam100
in IP Telephony and Phones
in IP Telephony and Phones
10-06-2012
02:18 AM
10-06-2012
02:18 AM
Dear Roger Thanks and yes i have done and followed the same steps as mentioned in the document which you suggest, i need to know about the troubleshooting like before when i dial my AutoAttendant extension 8150 its give me fast busy tone then i made CTI port, CTI route point on same search space after doing this practice when i dial my 8150 its take some time (not giving immediate fast busy tone) after some time phone display busy message with busy tone .......... what will be the aspected problem for this ????? Hope you guys will help me. Regards Salman
... View more
Created by
saljam100
in IP Telephony and Phones
in IP Telephony and Phones
10-06-2012
02:17 AM
10-06-2012
02:17 AM
Dear Roger Thanks and yes i have done and followed the same steps as mentioned in the document which you suggest, i need to know about the troubleshooting like before when i dial my AutoAttendant extension 8150 its give me fast busy tone then i made CTI port, CTI route point on same search space after doing this practice when i dial my 8150 its take some time (not giving immediate fast busy tone) after some time phone display busy message with busy tone .......... what will be the aspected problem for this ????? Hope you guys will help me. Regards Salman
... View more
Created by
saljam100
in IP Telephony and Phones
in IP Telephony and Phones
10-05-2012
10:15 PM
10-05-2012
10:15 PM
Dear Chris Thanks for your reply ........I checked the license its allow me 6 ports ............ what will be the checklist in order to properly configure the Cisco unity express with call manager 8.5...... and what does it means if the IP phone after some time when the operator extension is dialed give busy tone. Regards Salman
... View more
Created by
saljam100
in IP Telephony and Phones
in IP Telephony and Phones
10-05-2012
03:21 PM
10-05-2012
03:21 PM
Dear Experts i configured my cisco unity express module (Version : 7.4 evaluation copy) with my call manager 8.5 but when i dial my auto attendant extension 8150 its take some time like few sec and then its give busy tone with busy msg on phone .................... i configured only one CTI port b/w CUE and call manager just for the sake of testing the scenario.... Please help me and do let me know the troubleshooting steps to be done to resolve this issue i will be thankfull to you guys. Regards Salman
... View more
Labels:
08-12-2012
05:38 PM
Hi Guys I am trying to deploy DMVPN with one router placed on our head office as a Hub and our Branch as spoke but i actually want some sort of redundancy as i have two wan links on my Hub router. although i have on wan link on branch but what i did is to create two tunnel interfaces on branch pointing towards the each respective ISP so if one link goes down in Hub branches can stay connected through another one. Following is some more detail : Hub two wan links Hub two tunnel interfaces associated with each physical link accordingly Branch One Wan link Branch two tunnel interfaces associated with only physical link. Problem: As far as mGRE is concern everything is okay my branch can connect two tunnels (using one physical link) to the Hub having two tunnel interfaces associated with the two different ISP interfaces so if one goes down another is still available but problem occurrs when i add crypto to my mGRE tunnel, out of two tunnels from branch only one (the first one shown in diagram) is getting up but the second not even creating a GRE tunnel with HO when using crypto thats why no EIGRP neighbor relationship and no nhrp request over this tunnel. My question is why i am not able to create EIGRP neighborship when using crypto over GRE, where when i delete protection under tunnel interface its working fine branch can make EIGRP neighbor relationship and also the nhrp entries is also there also the routes populated in between but why not with using crypto. hope to hear from you guys soon for your reference i am attaching the diagram of topology also following is the complete configuration of my scenario. HUB -----------------------------------------------------------XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX--------------------------------------------------------- crypto isakmp policy 10 hash md5 authentication pre-share crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 crypto isakmp invalid-spi-recovery ! ! crypto ipsec transform-set B1 esp-3des esp-md5-hmac mode transport crypto ipsec transform-set B2 esp-3des esp-md5-hmac mode transport ! crypto ipsec profile B1 set security-association lifetime seconds 120 set transform-set B1 ! crypto ipsec profile B2 set security-association lifetime seconds 120 set transform-set B2 ! ! ! ! interface Loopback1 no ip address ! interface Tunnel1 ip address 10.10.10.1 255.255.255.0 no ip redirects ip nhrp map multicast 178.135.52.94 ip nhrp map 10.10.10.2 178.135.52.94 ip nhrp network-id 1 no ip split-horizon eigrp 100 no ip split-horizon eigrp 101 delay 2000 keepalive 10 5 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 1 tunnel protection ipsec profile B1 ! interface Tunnel2 ip address 172.16.2.1 255.255.255.0 no ip redirects no ip next-hop-self eigrp 100 no ip next-hop-self eigrp 101 ip nhrp map multicast 178.135.52.94 ip nhrp map 172.16.2.2 178.135.52.94 ip nhrp network-id 2 no ip split-horizon eigrp 100 no ip split-horizon eigrp 101 delay 2000 keepalive 10 5 tunnel source FastEthernet1/0 tunnel mode gre multipoint tunnel key 2 tunnel protection ipsec profile B2 interface FastEthernet0/0 "Desc= Primary interface on Hub for Branches to connect" ip address 62.149.74.66 255.255.255.240 duplex auto speed auto ! interface FastEthernet1/0 "Desc= Secondary interface on Hub for Branches to connect" ip address 62.149.75.1 255.255.255.252 no ip route-cache cef duplex auto speed auto ! interface FastEthernet2/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! router eigrp 100 network 10.10.10.0 0.0.0.255 network 192.168.1.0 no auto-summary ! router eigrp 101 network 172.16.2.0 0.0.0.255 network 192.168.1.0 no auto-summary ! ! no ip http server no ip http secure-server ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 62.149.74.67 track 1 ip route 0.0.0.0 0.0.0.0 62.149.75.2 track 2 ! ! SPOKE -----------------------------------------------------------XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX--------------------------------------------------------- Crypto isakmp policy 10 hash md5 authentication pre-share crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0 ! ! crypto ipsec transform-set aXX esp-3des esp-md5-hmac mode transport crypto ipsec transform-set B1 esp-3des esp-md5-hmac mode transport ! crypto ipsec profile B1 set security-association lifetime seconds 120 set transform-set B1 ! crypto ipsec profile aXX set security-association lifetime seconds 120 set transform-set aXX ! ! ! ! ! interface Loopback0 ip address 192.168.124.14 255.255.255.0 ! interface Tunnel1 ip address 10.10.10.2 255.255.255.0 no ip redirects ip nhrp map multicast 62.149.74.66 ip nhrp map 10.10.10.1 62.149.74.66 ip nhrp network-id 1 ip nhrp nhs 10.10.10.1 delay 1000 keepalive 10 5 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 1 tunnel protection ipsec profile B1 ! interface Tunnel2 ip address 172.16.2.2 255.255.255.0 no ip redirects no ip next-hop-self eigrp 100 no ip next-hop-self eigrp 101 ip nhrp map multicast 62.149.75.1 ip nhrp map 172.16.2.1 62.149.75.1 ip nhrp network-id 2 ip nhrp holdtime 300 ip nhrp nhs 172.16.2.1 no ip split-horizon eigrp 100 no ip split-horizon eigrp 101 delay 2000 keepalive 10 5 tunnel source FastEthernet0/0 tunnel mode gre multipoint tunnel key 2 tunnel protection ipsec profile axx ! interface FastEthernet0/0 "Description = Only interface used to connect with the both tunnel destinaition of Hub" ip address 178.135.52.94 255.255.255.252 duplex auto speed auto ! router eigrp 100 network 10.10.10.0 0.0.0.255 network 192.168.124.0 no auto-summary ! router eigrp 101 network 172.16.2.0 0.0.0.255 network 192.168.124.0 no auto-summary ! no ip http server no ip http secure-server ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 178.135.52.93 ! Also check attached network diagram ...... Do let me know if you guys have still any issue but please let me know the solution as sooon as possible Regards Salman Jamshed
... View more
Labels:
07-31-2012
02:42 PM
Dear Han Well if you use standard ACL its only check for source address and so all the traffic from the specific source will be Natted okay so in the scenarios like split tunnel ...etc we use mostly extended ACL to differentiate the traffic based on the destination like all the traffic for far end Lan subnet should'nt be Natted while all the other traffic which mean to be for internet should be Natted. Hope this will clear your concept. Regards Salman Jamshed Rate it if its usefull for you.
... View more
Created by
saljam100
in Small Business Routers
in Small Business Routers
07-30-2012
04:39 PM
07-30-2012
04:39 PM
hi all well we need to classify traffic on base of subnet rather then service .......so .....why dont you go for then cisco 800 series ? Regards salman jamshed
... View more
Created by
saljam100
in Unified Communications Infrastructure
01-05-2013
01-05-2013
HI all Following is my scenario....
------------------------------SIP------------------------------ ...
11-04-2012
Dear AllI need to back up my flash files to my ftp server i found some
solution about running config...
10-23-2012
Dear Alexander thanks for reply but i cant access the call manager
express the way you told me also ...
10-21-2012
Hi allI configured extension mobility on cisco call manager express but
i dont know how to configure...
10-16-2012
Hi allI want to redirect incoming call to any co-worker if he/she is not
on seat to my extension by ...
10-09-2012
Thannks alot for help but the problem is solved .....actual problem was
that all of the ports were a...
10-08-2012
Thanks for reply Chris the part of show output " Index 1 Feature:
VMIVR-PORTPeriod left: 7 weeks 4 d...
10-08-2012
Dear Chris and roger and all other expert I enabled the SIP trace on my
unity express module its giv...
10-06-2012
Thanks RogerWelll my CTI ports are register with CUE, also when
initialize the unity express module ...
10-06-2012
Dear RogerThanks and yes i have done and followed the same steps as
mentioned in the document which ...
10-06-2012
Dear RogerThanks and yes i have done and followed the same steps as
mentioned in the document which ...
10-05-2012
Dear ChrisThanks for your reply ........I checked the license its allow
me 6 ports ............ what...
10-05-2012
Dear Expertsi configured my cisco unity express module (Version : 7.4
evaluation copy) with my call ...
08-12-2012
Hi GuysI am trying to deploy DMVPN with one router placed on our head
office as a Hub and our Branch...
Public Statistics
| Date Registered | 02-22-2011 01:18 AM |
| Date Last Visited | 08-18-2017 03:55 AM |
| Total Messages Posted | 26 |
| Total Helpful Votes Received | 5 |
.jpg "Hall of Fame Master"){kind=icon}
