Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am just doing typical layer 2 edge switching so the LAN base license seems to be all I need but I also want to be able to remotely telnet/ssh into these switches with radius authentication and send log messages to an external syslog server. Do I ne...
Has anyone used CUPC 8 on Win7 64bit and if so do you run into any EXTREME slowness issues? It is happening for me whenever I open a chat session with someone that has a long chat history; the processor on the PC spikes and becomes basically unusable...
I am not sure what I am missing but I am unable to complete a call between two local zones on a single gatekeeper setup. I have an endpoint registering in one zone and trying to complete a call to a gateway in another zone. If I remove the second zon...
I am trying to add a simple TCL script that will play an announcement to callers that try to make outbound calls when in SRST mode. They have limited calling capabilities when the WAN is out so if they try to call a number that is not available inste...
I ran into the same issue on a vg224 and the cbarge solution works with on caveat, privacy is not an option you can turn on and off at the device or line level on the VG units. If you have privacy false for the cluster then that default value does ge...
Do you have a CTL file loaded on the phones or the CAPF running? If not I would clear all the secure services urls. If you are not running a mixed cluster the phones will not haev any certs so they won't trust any https services.
You should be all set as long as you have : isdn supp-service name calling isdn outgoing ie facilitytry doing a debug isdn q931 and see if you have the facility message with caller id similar to:ov 17 15:54:48.821: ISDN Se1/0/0:23 Q931: TX -> SETUP p...
There are 3 different feature sets with the universal images LAN Base, IP Base, and IP Services. My concern is that on the IOS Feature set Differences LAN Base say at layer 3 it offers SVIs but no IP routing support so just wasn't sure if that includ...
