Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an old 2500 that I am trying to set up as a terminal server for our lab environmnet. I have configured it all as I remember having to configure them in the past but I am not able to get a working connection to my enviornmet. I can make a conne...
Here is what I am trying to do ....I have a series of hosts A - F. I need them to communicate with hosts in an external/24 network, Network z. The communication can come from any of my hosts to any host in network z. I need to nat the traffic as it l...
I have a router in my new network that is confusing me. It is an old 2610 with a singe Ethernet inerface (NOT FASTethernet)and a Serial interface. I know that ethernet is a 10Mbps link, why would someone have the statment 'bandwidth 10000' on the int...
I have a client that has a network built out of Cisco Aironet 1200 Series APs. Local authentication is required and everything else seems to be pretty standard. I have not been able to get the MACBook to authenticate to the network. I got a Cisco PCM...
I have a client that is trying to use a Windows ISA server as a RADIUS server to authenticate PPTP connections to a 515e. I know that the VPN connection is working since I can set it up to use local auth and it works just fine. When I set up radius t...
So, I have taken my console cable connected it to cable labled as 1, connected it to lines 1 8 and tested telnet 192.168.0.1 2001. I then connected to cable 2 and tested using 2001 agian. I iterated through all 8 cables. I moved it to line 9 16 and t...
I know right? Thats why I never even thought to look at the cables. I can console to it from my PC and I have tried using a stright through and a rolled, even a cross, with them and still nothing. I am looking to see if I can find someone that has a ...
Looks like it is the correct cable type and the config is correct ... I am testing all the octal cables as I get the same result when they are connected or not so I am leaning towards a bad cable issue with all 4 of my CAB-OCTAL sets Thanks again fo...
I will give both those a once over when I get in in the AM. Don't remember if I set the transport input on the serial lines for the 2500 Thanks for the second eyes ... Peper
