About danletkeman

danletkeman · 04-10-2023

Hello,I think I a missing a step to get this working, but I cannot seem to put my finger on it.I have a 7965G with a 7916-24 addon module. CME version 12.3. IOS-XE 16.9.8The module powers up and goes to a black screen / screen off.The status menu in...

danletkeman · 01-21-2023

Hello,I have a 4331-V/K9 that I would like to use for an IP phone system. It currently has IOS-XE 16.3 installed and has a permanent UC license. I see that the SWSS licensing is EOS and that flex is the only option:https://www.cisco.com/c/en/us/pro...

danletkeman · 09-23-2009

Hello,I have a lot clients that show many 28 min 48 sec association duration. Is this a problem with the wireless network or client drivers? It's happening with more than one brand of wireless card and different brand of computers.WCS and 5508 WLC ...

danletkeman · 09-06-2009

Hello,Does anyone have a 5508 controller with 1142's setup in H-Reap mode with wpa2/aes/psk authentication?No matter what configuration i try I cannot get a client connected if the access point is communicating with the controller. As soon as I disa...

danletkeman · 09-02-2009

Hello,I'm seeing a high number of output drops when we are running backups from site to site over a wireless bridge. Our setup is a follows:backup server - 3560G - 3560 - 70mbit wireless bridge - 3560G - sanWhen the backups are running and sending d...

danletkeman · 04-10-2023

Needed the load file setup in the telephony-service. Now it works.

danletkeman · 04-10-2023

3560x for the POE on the phone and the power supply to power the module. The phone works fine, and the module turns on just fine, but after it boots it goes to a black screen because its not configured on the phone.

danletkeman · 01-22-2023

Thanks, that makes sense.Do you know if the terms for A-FLEX-EP-CME are 1 year? I was unable to find any documentation on this license.

danletkeman · 11-13-2009

I fixed the problem a while ago with a restart of the controller. I had never restarted it after the initial bootup.

danletkeman · 10-06-2009

Ah yes. It is set to 1800 seconds.The documentation says:Set the maximum time, in seconds, for a client session before requiring reauthorization.The default values are for the following Layer 2 security types: * 1800-802.1X; Static WEP+802.1X; WP...

Member Since	‎03-25-2006 08:00 AM
Date Last Visited	‎08-30-2023 12:33 AM
Posts	122

User Statistics

User Activity

7965G & 7916-24 Addon not working

ISR 4331 CME Licensing

WCS Association History Duration

5508 1142 H-Reap anyone?

Output drops over wireless bridge

Re: 7965G & 7916-24 Addon not working

Re: 7965G & 7916-24 Addon not working

Re: ISR 4331 CME Licensing

Re: 802.1x authentication on PSK key mgmt?

Re: WCS Association History Duration