Hi,I have an issue with some call transfer from PSTN. Ex: A cellular user transfers his cell. phone on busy or no answer to his business ip phone. When the transfer is done, we have no ring back tone. I am running ip plus 12.2(4)T1 on 3640 using T1...
In the following Cisco doc:http://www.cisco.com/univercd/cc/td/doc/product/voice/ip_tele/network/dgdialp.htmthe idle digit wait timer is mentionned, any idea under which menu where to find that service parameters? I am running 3.1 (2c)
Hi,debug voice ccapi inout will tell you a little more information about your disconnect.On all your dial-peer voice 1 pots use direct-inward-dial command.PL
Hi,Try this command:no crypto ipsec nat-transparency udp-encapsIf you are running 12.3T, read the following:http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feature_guide09186a0080110bca.htmlPL
Did you enter ip routing command? See following:http://www.cisco.com/en/US/partner/tech/tk389/tk815/technologies_configuration_example09186a008019e74e.shtml
