Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,my customers and I don't like the default CUCM behavior of setting a directory number to Inactive, as soon as there is no more device assigned.If a phone gets deleted or a new DN assigned, the original DN usually is kept active for a certain ...
Hi guys,my customers and I don't like the default setting in CUCM to automatically set directory numbers to Inactive as soon as there is no more device assigned with it.In most cases if a phone gets deleted or a new DN assigned, the original DN will ...
Hello all,is there a way to forward declined calls from the Jabber for Windows client to a specified target?By default, the call will be forwarded to the Unity Voicemail.But as only a few users do have a voicemail assigned, I would like to set a diff...
Hi Roger, here are three use cases for local users. There are probably more. 1) Most customers require the Active Directory users to change their password regularly. Therefore I often use a local end user on CUCM with a static password for testing. A...
Hi Jaime, sorry for that. But my first post got marked as Spam and closed a few seconds after I opened it. So I opened a new one. Seems like a moderator might have opened the original post again. Johannes
thanks, had the same issue after upgrading to v12.5call flow diagram was OK, but no detailed SIP message.It works again now, after I disabled the SIP Call Processing Trace in Cisco Unified Serviceability and re-anabled it agin.
Hi, you should be able to access it via the Webex Control Hub.In the submenu "Devices" choose your board and click on "Open the web interface of the device" at the bottom. This will connect to the IP-address of your Board directly and will log you in...
Hi,the URL does exist, but no login is possible. I get the correct error when the entered username/password is wrong.I get the correct error when the entered username/password has no access to the portal. I get the error message "Success" with a red ...
