Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Topology:ce1---- g0/1 PE1 ---- PE2 g2/2---- Switch---- ce2 and other CE's 1.1.1.1 2.2.2.2Ive never done service instances, so considering the above topology, how can i use service instance to xconnect one of gig2/2 vlans on PE2 to C...
Hi Alltheres not much offered by cisco for interworking local attachment circuits for atom l2vpn. ive looked it up, but im specifically wondering about the FR-ethernet/vlan or PPP-ethernet/vlan couldnt find any references for those. are these possibl...
call manager 7 and 2821, they speak mgcpi can make calls out the bri.i have translation pattern for isdn calls on incoming called number to be forwarded to the receptionest extension.but im getting a busy signal and the following on the debug isdn q9...
Yasiri cant do it on SVI's since my Wan blade is not core facing, TAC said i could still use the WAN blade capabilities through service instances.so question remains, how could i still keep my trunk and use service instances at the same time!thanks f...
yes, but could you please answer if creating service instances would deny other vlans from flowing through my trunk port. im not intending to remove the trunk port, there are other vlans that still need to flow throughout other parts of the network, ...
but i have other CE's connected to that switch and tagged with other vlans? can't i keep the trunk for the other vlans tagged and used for other purposes as well?
WonCheol Kimits not possible since your xconnect is on an access subinterface, hence no tag is carried. I did this on an ME in a q-in-q setup. my configs on the ce facing port was like this:int fx/x switchport access vlan yy switchport mode d...
