Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible customize the range of ports that RTP will use on CME ?
From the discussion " https://supportforums.cisco.com/discussion/12755766/specify-rtp-ports-use-cme " it seems that I can customize the RTP ports inside the range 16384-32768.
My ...
I have an POE device that needs to receive power on pins 4, 5, 7 and 8 (Mode B/midspan), but when I connect this device on my WS-C2960X-48FPD-L nothing happens. Do you guys have a clue if this Mode B (midspan) it is supported by this switch model or/...
I am having problems to import users from AD to the TMS. In the Active Directory section, I set Allow AD groups to Yes and I was able to Import a Group from AD, but when a enter in this group there is no users in it.I tryed to log on with a user and ...
In my enviroment we have expressway (E/C), TMS, Conductor , CUCM (10.5). My TPs (endpoints) are registered on CUCM. I am having problems to place (B2B) outside calls to H323 systems via IP or in the format IP##Extension.I made some configurations ac...
In Mac OS X 10.11 (El Capitan), with Cisco Jabber client (ver 11.1) when I try to connect in a manual fashion (without _cisco-UDS SRV), CUCM only (no presence) I dont receive the option to enter username and password. If instead we choose im&p and en...
Hi stcorry, I am really new in Cisco ACI world., but from this document https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-737909.html, I have had a different understandmen...
Hi Manish,
Thank you for reply.
But do you know how to do it ?Because the command "rtp-port range " give me a range from 16384 to 32766 and I needed from 10000 to 14000.
Regards,
Mauricio
Hello Harsha.
Tks for your reply.
When I connect the device the status remains down down.The "power inline auto" is the default state, but I also configured "power inline auto" and "power inline static" for test purpose and nothing happened.
Regards...
Thanks, Patrick. TMS actually wasn't member of my AD domain. As soon as I added it in domain, I was able to log into TMS with an AD User
Regards,
Mauricio
The account is a local admin account.
When I try to log into TMS with and AD account keeps appearing a pop up to enter user/password, just like when I log with the admin account. When I press cancel the following error message appears :
"Server Error...
