I have a UCS-Mini that I share with a different group, and we are in the process of separating our resources. Currently, there is a single trunk connection to each side of the UCS Fabric Interconnect. The expansion ports are used for storage conn...
Hi, I recently installed an SAF Technika microwave system that has links which are 2+0 (2 parallel microwave links). Each link is 450 Mbps and one side connects to a IE-5000 and the other side to an IE-4000. As long as the bandwidth is 400 Mbps or...
I am building a microwave hub on top of a mountain for 6 1GB wireless links. I am choosing the IE-5000 because I am not 100% confident in my temperature control. I will need layer 3 switching, so I want to buy the IP Services software upgrade. 1....
I recently purchased several of the IE-1000 switches and exploring the GUI. Unfortunately, I mis-configured the switch and now it is inaccessible. I would like to reset the switch back to factory defaults. However the instructions don't seem to ma...
Since this past summer of 2020, I have worked with both Cisco and SAF to try to resolve this issue. Here most of what was found:It appears that SAF Tehnika was not strictly following the 1Gbps ethernet protocol standard. It took a long time to get th...
Now that I have implemented the IE-5000, while it does support layer 3 switching, I might call it Layer 3 light. It doesn't support all the layer 3 items that you would see in a normal Cisco 4431 router. We did get everything implemented, but we ha...