Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all,
a customer use 8.0.140.0 on a WLC 5508, currently the 1240 APs get the 12.4(25e)JAM5 image, because of a Bug the APs will need 12.4(25e)JAP10 or JAP4.
Is it possible to Update the AP Images on the WLC? Does Cisco update the WLC Images wit...
This only works for me if I delete the RSA keys before regenerating them.
conf t
no netconf-yang
crypto key zeroize rsa
crypto key generate rsa modulus 2048
netconf-yang
"But by the time March 2025: there is a command maglev-config factory_reset."
I did a test with the maglev-config factory_reset. It does not work. After reloading, CatC still has its settings.
#show romvar
will also do the job without reboot in ROMMON
AIR-LAB1-S1#sh romvarROMMON variables:ASIC_PCI_RESET="1"AUTO_SWITCH_CONSOLE_DISABLE="0"BOOT_LOADER_UPGRADE_DISABLE="1"CFG_MODEL_NUM="WS-C3650-24TS-E"CLEI_CODE_NUMBER="IPMV810BRE"CSR_PCIERST...
