Hello There,
I am routing and switching person and I have a voice task and I am half way thru but the last part that I am not able to understand is below.
Request: We have a voice translation rule which replaces all outbound calls with a phone nu...
Hello Guys,I have converted ap 1131 from autonomous to lwapp successfully by using upgrade utility tool but the AP does not join the WLC 2106. I can see it as a neighbor on the switch with no IP address. please help me.Thank you
Hello Guys,We have a stack switches connected with stack cables and the cable between swt2 and swt3 has been replaced since we are getting too many errors in bold below.atukrea-sw11#show switch stack-ports summarySwitch#/ Stack ...
Hello Every one,I am new to this world and i have some knowledge on VTP and i am trying to implement in the lab. I have 2 switches 3550 and 3750. my questions are:1. why i can't see vlans in the running config on switch 3750 even a...
Hello Mikolaj,
Thank you for the reply.
You mean as below?
voice translation-rule 1 rule 1 /^7080$/ /xxxxxxxxxy/ rule 2 /^7081$/ /xxxxxxxxxz/ rule 3 /.+/ /xxxxxxxxxx/
Thank you
Hi Chris,
Below is what I am able to get. Bold fonts is the configuration that is made specifically for these new phones.
voice-card 0 dspfarm dsp services dspfarm!!!voice service voip allow-connections h323 to h323 allow-connections h323 to sip ...
Hi Chris,
We are using POTS, I dont have access to the router, I got the logs earlier from some other team.
I have opened a cisco TAC case for configuration assistance.
Thanks a lot Chris for the responses.