Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allI've been facing an interrogation and want your though about this.*** See attachment for detail.***I want to know if the switch from site A will report MAC flapping issue for a MAC of the site B switchesSite A is a 3750 stack and site B is a 45...
Hi,We have 300 stores with mostly the same router config.The router in each store is a cisco 891 router capable of doing QOS.Each of our store is connected to internet through a local Internet Service Provider (ISP). They all have different ISP.Each...
Hi allI created a fault and event report on my syslog data. I run this report weekly. I now need to change setting in that report but I'm not able to see where to edit this report. I see my job scheduled in the list but not able to modify anything....
I want to check for the existence of the following two logging serveur into my router devices. I also want to make sure there's only those two logging server in my configurationHere's my logging server10.10.10.111.11.11.1So I put those 3 lines in my...
Hi AllI'm pretty sure it wasn't available on version 4.1 of prime LMS based on my research on this forum but I'm now using version 4.2 and still want to know if cisco added the possibility of filtering devices from dashboard portlet's output. (like h...
Hi had to change the SDM prefer mode from routing to accessAccess SDM mode allocate more resources for security acesYou can look at your SDM mode by entering "sh sdm prefer". You can change it by using the "sdm prefer [type]" command.Hope that helps
logging buffered 200000no logging consolelogging esm configlogging 10.10.10.1logging 11.11.11.1I took care of the screenshot you sent me but I'm still having the same issue. Device NameLatest VersionCreated OnCommand(s) to DeployF.D.4182535484.R001....
You got it. It's the only thing I have in my template for now. I have nothing more.My thought are that prime can use the "include all" wildcard [#.*#] but only with inclusion line not exclusion. Is that make sence ?
