Hi! I'm trying to change the language on the 8845 phone according to the guide: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmelocal.html The process fails with error "Error Updating Locale". I am usin...
Hi! How to config BGP on IOS XR to don`t advertise my prefix to my ISP global upstream providers using its cummunity? Example of my ISP community from RIPE records: 2xxx4:96 Don't advertise to global upstream providers How can I set this on IOS XR? I...
Hi!
I'm configuring a call forwarding from internal extension to the external number:
ephone-dn 2 dual-linenumber 802name 802call-forward all 0111222333
There is no physical phone for this DN. It`s a dummy/virtual DN that is already CFA to the ...
Hi,
I have Cisco CME 11.5
Scenario:
External caller (from SIP TRUNK) calls phone A. Ringback is OK.Then the call is transfered (full-consult) to phone BPhone B is ringing but the external caller is not hearing a ringback tone.
Any suggestions...
Hi!
On Cisco IOS I have BGP configuration:
ip access-list standard RIPE_Public permit xy.xy.xy.0 0.0.1.255 permit xz.xz.xz.0 0.0.3.255
route-map TS permit 20 match ip address RIPE_Public
neighbor xx.xx.xx.xx route-map TS out
How shoud this lo...
Another extension 670, 671, 672. After delete and e-add DN:
20200 pots up up 671$ 0 50/0/299 NA20201 pots up up 670$ 0 50/0/300 NA20202 pots up up 672$ 0 50/0/298 NA
but when re-add button to ephone - CH1 is DOWN:
show ephone
ephone-42[41] Ma...
cme#show dial-peer voice summary | inc 802
20177 pots down down 802$ 0 50/0/298 NA
This configuration worked well before CME upgrade. It`s seems like I can no call forward all an ephone-dn that is not assigned to a registered phone (?)