Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good MorningWe have a pair of ISR4331 on version 17.12.4a which are used to route calls from the PSTN to and from CUCM and MS Teams calling. SIP connections to the PSTN are on dedicated trunks to the Telco. SIP connection to MST go via our Internet ...
I am hoping someone can explain why this is a terrible idea, because I am sure there is something really obvious that I am missing.We currently have a 1Gb Internet connection terminated on an ISR4331, one interface Gi0/0/0 has an ISP supplied IP addr...
Apologies for sounding like a complete idiot, but I suspect I am one. Is anyone able to provide any insight on how qos-groups are defined on the N9K. I am trying to follow how queuing works, and I can get as far as the following ( not all output show...
Hi,I am hoping someone with real world experience can cast some light on this for me please. My problem is that the existing Cisco servers that host our VM servers for CUCM, CUC and CUPS/IMPS have reached end of life and need to be replaced. We are o...
Hi,My thanks and apologies in advance for this question as I feel I should know the answer. I am looking at the load balancing configuration for port-channel groups on our Nexus N5548UP switches NX-OS version 7.3(5)N1(1) The switch configuration says...
Hi Balaj,Thanks for taking the time to reply.The new connection will have a 10 Gb interface but capped at 2Gb with the option to increasing to 10Gb later, so I would be looking t future proofing the hardware by sizing for 10 Gb throughput.I am aware ...
Hi MHMThanks for replying.1. There is no need for NAT, that is done either on the firewall or ASA2. As we do not have an ASN we are using static routes and the ISP is advertising out /24 on our behalf.3. No need for VPN we are using site to site VPN ...
