Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,my customer ask me if it is possible to end every call when hang up the handset instead to use the headset button or speaker button, i didn't find any settings, someone can help me?Thank you in advanceFabrizio
Hello,we experiencing a problem in RTMT syslog messages, there are a lot of these message : WARNING : /etc/modprobe.conf line 9: ignoring bad line starting with 'if' WARNING : /etc/modprobe.conf line 11: ignoring bad line starting with 'endif' I have...
Hello,we have two WLC model 5508 with software version 7.0.116.0 (25 ap supported for each), i tried to add a new access point air-lap1131ag-e-k9 but after five minuts (maximum) the ap reboot, i replaced : - power injector- AC/DC adapter- patch ether...
Hi,in my scenario i have the OCS 2007 R2 integrated with ip telephony infrastructure, so i can manage ip phone from my pc, but this cause a problem for my user : when i set the call forward from the Cisco ip telephony, all works properly until I logo...
Hi,i have a CUE with version 3.2.1, i'm experiencing a problem with the smtp settings, i changed the smtp server in the infrastructure, so i changed the ip address in the smtp settings in the CUE, all works properly until reboot.After reboot, the CUE...
Hi,if you want to try to understand what happens try to connect in console to an AP and capture the log.AP should give you some messages about the reason of the restart, could be an upgrade issue, if you have upgraded your wlc software.Sometimes the ...
I know that it may seem unusual, i start the call with the handset and i need to get the hands free so i use the speaker button, at the end of the call i hang up the handset, in this situation the users of my customer expect that the call closes.I th...
