I have the FireSIGHT Management Center set up and I have a 90 day license for url filtering/malware. I have registered the licenses on the FMC, and added a 5506 to the console. But I can't seem to apply the available license to the 5506. So I'm un...
Hi, I'm having an issue with an SX20 device that keeps receiving nuisance h323 calls, no IP address is displayed and it just says "cisco". We have received over 100 of these calls. As a work around I have blocked all h323 on the firewall and only a...
Hi all, I'm having a strange issue on an asa (ver 9) where certain hosts on the inside can't connect to each other. All internal hosts are on the same subnet connected to the "inside" interface, and 'same-security-traffic permit intra-interface' is e...
Hi,I'm having some issues with setting up a Guest SSID on a Lightweight AP using H-Reap mode.The issue is that the clients won't load the Guest Web Login page unless I manually reduce the mtu size on the client, eg from 1500 to 1300. I'll try and gi...
In need of some assistance please, on the phone configuration page of about half of our phones I receive the following error:"Unmapped Exception Invalid input length for decryption.Should be a multiple of the block size - 16"I'm not able to find much...
I redeemed the control license on the ASA when it was in Standalone mode. I actually thought that may have been the issue so I removed the ASA from the FMC and removed the license. Then added it back to the FMC but I still have the same issue. Do I...
Did you manage to get this fixed? We have just bought some 3850's and I'm also having trouble implementing traffic shaping, can't seem to find too much info on this.
Thanks guys, there is no VCS-E or CUCM available in this instance so I guess there's no other choice right now apart from blocking everything like we have done. It's a minor inconvenience to add new ip's to the allowed list but not that bad as they...
