Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team,
I am a demo user of Cisco CML with cisco supplied CML box, I am running CML1.1 and most of the images i am running are running fine but only ASAv941, it seems like i cannot run it, tried multiple images same result.
in CML1.1 it shows ACTI...
Hello,Im facing a very strange problem, i have two WS-X6K-SUP2-2GE which were installed on Slot 1 and Slot 2, i upgraded them from Catos to IOS, now after upgrade SUP from Slot2 doesnt come up. both SUP are fine, both come up on the SLOT 1 but, if i ...
need little confirmation, has any one tested the PPPoE, BRAS functionality on CISCO 7600 with SUP720+12.2SRC+SIP-400 topology, does it really work and does it really give some practical difference from 7200 NPE-G2.
I need little confirmation, has any one tested the PPPoE, BRAS functionality on CISCO 7600 with SUP720+12.2SRC+SIP-400 topology, does it really work and does it really give some practical difference from 7200 NPE-G2.
Hi,
Actually its very good question, i had same confusion, let me try to write it in very simple steps.
Basically you just need to connect switches physically and follow the guide lines below, and make sure you boot aci image, and ports are up.
...
Hi,for PPPoE, check if your customer has configured the MTU to 1492 at the dialer interface and tcp mss adjust to 1452 at the dialer or LAN facing interface.
