Cisco IP Conference Phone 8832. It has wireless built-in.
I wonder why Leo did not suggest this model.
8832 Admin Guide - https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8832/english/adminguide/cs88_b_conference-8832-admin-guide-cucm/cs88_b_conference-8832-admin-guide-cucm_chapter_010.html#task_AEA8EAFD7F5F961C42C6D95D9244BA62
User Guide - https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8832/english/userguide/cs88_b_conference-8832-user-guide/cs88_b_conference-8832-user-guide_chapter_00.html
... View more
@DamianRC
In the states there is E911 service. Depending how you want to deploy this service you can use Cisco Emergency Responder or use the services your E911 provider offers.
We've reached out to a few vendors and West services (https://www.west.com/) is what we are looking into and mostly their own service. If I recall correctly they do not need the Cisco Emergency Responder, but they will sell you their own equipment.
Redsky also does it also - http://www.redskye911.com/
... View more
Hello @Flavio Miranda and thank you for your suggestion. This worked! Removing the source protocol and leaving only the destination protocol worked. Again thanks for the help.
For ACL IN
2 permit udp 10.17.0.128/25 10.4.117.10/32 eq bootps 3 permit udp 10.17.0.128/25 10.4.217.10/32 eq bootps 4 permit udp 10.17.0.128/25 255.255.255.255/32 eq bootps 5 permit udp any any eq bootps
ACL OUT
2 permit udp 10.4.117.10/32 10.17.0.128/25 eq bootpc 3 permit udp 10.4.217.10/32 10.17.0.128/25 eq bootpc 4 permit udp 255.255.255.255/32 10.17.0.128/25 eq bootpc 5 permit udp any any eq bootpc
... View more
Trying to Configure an ACL for one of our Fex. More specifically I want to create an ACL that allows the only VLAN on the Fex to our two DHCP servers.
Nexus 5k
system image file is: bootflash:///n6000-uk9.7.3.2.N1.1.bin
The below config does not work. I have a windows laptop that sends out requests and never obtains an IP from the DHCP server.
Int Config:
!Command: show running-config interface Vlan101
interface Vlan101 description no shutdown
ip access-group VLAN101 in ip access-group VL101 out ip flow monitor standard_v9netflow input sampler flowsampler no ip redirects ip address 10.17.0.130/25 no ipv6 redirects ip router ospf hsrp version 2 hsrp 101 preempt priority 120 timers 1 4 ip 10.17.0.129 ip dhcp relay address 10.4.117.10 ip dhcp relay address 10.4.227.10
ip access-list VLAN101
1 permit udp 10.17.0.128/25 eq bootpc 10.4.117.10/32 eq bootps 2 permit udp 10.17.0.128/25 eq bootpc 10.4.227.10/32 eq bootps 3 permit udp 10.17.0.128/25 eq bootpc 255.255.255.255/32 eq bootps 4 permit udp any eq bootpc any
5 deny any any
ip access-list VL101
2 permit udp 10.4.117.10/32 eq bootps 10.17.0.128/25 eq bootpc 3 permit udp 10.4.217.10/32 eq bootps 10.17.0.128/25 eq bootpc 4 permit udp 255.255.255.255/32 eq bootps 10.17.0.128/25 eq bootpc 5 permit udp 255.255.255.255/32 eq bootps 0.0.0.0/32 eq bootpc
I left the top three lines in VLAN101 the same when I attempted to troubleshoot. The only changes I've made were to the 4th line. I've tried the following.
permit udp any eq bootpc any eq bootps
permit udp 0.0.0.0/32 eq bootpc 255.255.255.255/32 eq bootps
permit udp host 0.0.0.0 host 255.255.255.255 eq bootpc (This automatically changes hosts to 0.0.0.0/32 eq bootpc 255.255.255.255/32 ).
I also removed lines 1-3 in VLAN101 and tried all the variants I listed and still nothing. I have not adjusted anything in VL101
Removed the acl VLAN101 and VL101 from the vlan interface and DHCP works.
I appreciate any adive or suggestions.
... View more
I can confirm with Wesley Austin.
I ran the upgrade this past weekend and only CIMC and BIOS were upgraded.
I opted to upgrade all the detected devices, option 8.
The BIOS and CIMC upgraded, as for the LOM I got a message informing me the ISO version and installed version were the same and was prompted if I wanted to overwrite. I said no to that. I believe the LSI prompted me the same question.
My broadcom 5709 quad port adatper was updated to the same version, no prompt was given to me for this.
... View more
I plan on upgrading two C210 M2s from 1.4(3x) to 1.4(3z). This my first ever UCS firmware upgrade so I want to cover all my bases.
I followed this quick guide - http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/lomug/1-4-x/install/b_huu_1_4_3.html
I get I mount the ISO to KVM or on the CD/DVD drive directly. Boot to it and navigate the menus.
Is it recommended to upgrade all the firmware on the ISO ? Am I better off upgrading the firmware individually or with the upgrade all ?
I'm running ESXi 5.5 SU2 on both of these C210s and anyone have any recommendations to look into prior to upgrading for anything Vmware specific ?
Lastly any tips ?
... View more